We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board with black memory chips and gold edge connector

NEMIX RAM

NEMIX RAM 4GB DDR3 1333MHz 204-Pin SODIMM POSIFLEX HC-1521P memory upgrade

SKU CH-26YV-0XF4M

A 4 GB DDR3 SODIMM module running at 1333 MHz, built for the POSIFLEX HC-1521P terminal

  • Capacity4GB
  • SpeedDDR3 1333 (PC3 10600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.50V
  • Designed for POSIFLEX HC-1521P terminal compatibility
  • 4GB DDR3 1333MHz capacity boosts system responsiveness
  • Low 1.35V voltage reduces power consumption
  • 204-pin SODIMM form factor fits laptop slots
  • CL9 latency with 2Rx8 rank optimises throughput

NEMIX RAM 4GB DDR3 SODIMM for POSIFLEX HC-1521P

This NEMIX RAM module provides a 4GB DDR3 1333MHz memory upgrade built specifically for the POSIFLEX HC-1521P high-end touch screen infotainment terminal. It uses a 204-pin SODIMM form factor with non-ECC unbuffered architecture.

Suits POS terminal maintenance, not general laptops

The module suits technicians servicing the named POSIFLEX terminal or identical OEM platforms requiring PC3-10600 2Rx8 chips at 1.35V or 1.50V operation. It is not for systems needing ECC error correction, registered buffering, higher capacities per slot, or different DDR generations.

204-pin DDR3 SODIMM interface decides fit

The single specification that decides compatibility is the 204-pin DDR3 SODIMM interface combined with the exact POSIFLEX HC-1521P system validation. Only terminals accepting this pin-out, voltage range, and rank configuration will accept the part.

Highlights

  • Designed for POSIFLEX HC-1521P terminal compatibility
  • 4GB DDR3 1333MHz capacity boosts system responsiveness
  • Low 1.35V voltage reduces power consumption
  • 204-pin SODIMM form factor fits laptop slots
  • CL9 latency with 2Rx8 rank optimises throughput

Specifications

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR3 1333MHZ Non-ECC Unbuffered SODIMM
Part NumberMS10600-428K1
Capacity4GB
SpeedDDR3 1333 (PC3 10600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.50V
Compatible SystemPOSIFLEX POS
CAS LatencyCL9
Heat SpreaderNo
Type204-Pin DDR3 SODIMM
Rank2Rx8
FeaturesDDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content4GB (1X4GB) DDR3 1333MHZ PC3-10600 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM

Questions about this item

Does my POSIFLEX HC-1521P terminal need a free 204-pin SODIMM slot to use this module?

Yes, the module is a 204-pin DDR3 SODIMM and requires an available SODIMM slot in the POSIFLEX HC-1521P to install.

Will this 1.35 V DDR3 SODIMM run reliably alongside existing 1.50 V DDR3 modules in the same system?

The module operates at 1.35 V while standard DDR3 runs at 1.50 V; the system will typically run all modules at the higher voltage, so mixing is usually stable but check the terminal's manual.

How can I confirm the module is running at DDR3 1333 (PC3-10600) with CL9 latency after installation?

Enter the system BIOS or use a tool like CPU-Z; the memory tab should show 1333 MHz speed, PC3-10600 rating and CL9 timings for the installed module.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.