Aceitamos criptomoeda — para que as moedas que detém possam comprar material informático real.Pague em cripto, gaste-a em material informático real. Envio seguro gratuito para todo o mundo acima de 399 $. Caixas neutras, sem marca, expedidas a partir da Alemanha.Envio seguro gratuito acima de 399 $. A sua taxa fica bloqueada durante 30 minutos assim que abre a finalização da compra.Taxa bloqueada 30 minutos. Cada artigo é selado, o seu número de série é verificado, e está coberto por uma garantia de 24 meses.Selado, garantido 24 meses.

Artigos guardados Iniciar sessão
Green circuit board with black memory chips and gold edge connector

NEMIX RAM

NEMIX RAM 4GB DDR3 1333MHz 204-Pin SODIMM POSIFLEX HC-1521P memory upgrade

SKU CH-26YV-0XF4M

A 4 GB DDR3 SODIMM module running at 1333 MHz, built for the POSIFLEX HC-1521P terminal

  • Capacity4GB
  • SpeedDDR3 1333 (PC3 10600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.50V
  • Designed for POSIFLEX HC-1521P terminal compatibility
  • 4GB DDR3 1333MHz capacity boosts system responsiveness
  • Low 1.35V voltage reduces power consumption
  • 204-pin SODIMM form factor fits laptop slots
  • CL9 latency with 2Rx8 rank optimises throughput

NEMIX RAM 4GB DDR3 SODIMM for POSIFLEX HC-1521P

This NEMIX RAM module provides a 4GB DDR3 1333MHz memory upgrade built specifically for the POSIFLEX HC-1521P high-end touch screen infotainment terminal. It uses a 204-pin SODIMM form factor with non-ECC unbuffered architecture.

Suits POS terminal maintenance, not general laptops

The module suits technicians servicing the named POSIFLEX terminal or identical OEM platforms requiring PC3-10600 2Rx8 chips at 1.35V or 1.50V operation. It is not for systems needing ECC error correction, registered buffering, higher capacities per slot, or different DDR generations.

204-pin DDR3 SODIMM interface decides fit

The single specification that decides compatibility is the 204-pin DDR3 SODIMM interface combined with the exact POSIFLEX HC-1521P system validation. Only terminals accepting this pin-out, voltage range, and rank configuration will accept the part.

Pontos fortes

  • Designed for POSIFLEX HC-1521P terminal compatibility
  • 4GB DDR3 1333MHz capacity boosts system responsiveness
  • Low 1.35V voltage reduces power consumption
  • 204-pin SODIMM form factor fits laptop slots
  • CL9 latency with 2Rx8 rank optimises throughput

Especificações

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR3 1333MHZ Non-ECC Unbuffered SODIMM
Part NumberMS10600-428K1
Capacity4GB
SpeedDDR3 1333 (PC3 10600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.50V
Compatible SystemPOSIFLEX POS
CAS LatencyCL9
Heat SpreaderNo
Type204-Pin DDR3 SODIMM
Rank2Rx8
FeaturesDDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content4GB (1X4GB) DDR3 1333MHZ PC3-10600 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM

Perguntas sobre este artigo

Does my POSIFLEX HC-1521P terminal need a free 204-pin SODIMM slot to use this module?

Yes, the module is a 204-pin DDR3 SODIMM and requires an available SODIMM slot in the POSIFLEX HC-1521P to install.

Will this 1.35 V DDR3 SODIMM run reliably alongside existing 1.50 V DDR3 modules in the same system?

The module operates at 1.35 V while standard DDR3 runs at 1.50 V; the system will typically run all modules at the higher voltage, so mixing is usually stable but check the terminal's manual.

How can I confirm the module is running at DDR3 1333 (PC3-10600) with CL9 latency after installation?

Enter the system BIOS or use a tool like CPU-Z; the memory tab should show 1333 MHz speed, PC3-10600 rating and CL9 timings for the installed module.

Também nesta secção

Os clientes também compararam

Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.