XPG GAMMIX S11 Pro 1TB internal SSD with heatsink
- Internal Solid Stat…
- Consumer
Kami menerima kripto — jadi koin yang anda simpan boleh membeli perkakasan sebenar.Bayar dengan kripto, belanjakannya untuk perkakasan sebenar. Penghantaran berinsurans percuma ke seluruh dunia untuk belian melebihi USD 399. Kotak biasa tanpa jenama, dihantar dari Jerman.Penghantaran berinsurans percuma untuk belian melebihi USD 399. Kadar anda dikunci selama 30 minit sebaik sahaja proses pesanan bermula.Kadar dikunci selama 30 minit. Setiap item disegel, nombor sirinya disemak, dan dilindungi waranti 24 bulan.Disegel, waranti 24 bulan.
XPG
2 TB PCIe 3.0 x4 NVMe 1.3 SSD with heatsink reaching 3500 MB/s read and 3000 MB/s write
Options 2TB S11 Pro
This internal SSD uses the M.2 2280 form factor and a PCIe 3.0 x4 interface with NVMe 1.3 support. It targets gamers, PC enthusiasts, overclockers and video rendering professionals who need high sequential throughput. The integrated heatsink lowers drive temperature by up to 10°C compared to models without one, aiding stability under sustained load.
The drive fits standard M.2 slots on current Intel and AMD desktop platforms. Ensure the motherboard BIOS is up to date so the NVMe device is detected at boot. A frequent problem is thermal throttling if the heatsink contacts a motherboard shield or backplate without a gap; leave a small clearance for airflow.
With 2TB of 3D NAND storage and a 1280 TBW endurance rating, the drive handles large game libraries, project files and heavy write workloads comfortably. Sequential speeds reach 3500 MB/s read and 3000 MB/s write, while random performance hits 360000 IOPS. Under extreme, sustained write scenarios the SLC cache can saturate, causing speeds to drop toward native NAND levels.
| Brand | XPG |
|---|---|
| Series | GAMMIX S11 Pro |
| Model | AGAMMIXS11P-2TT-C |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | M.2 2280 |
| Capacity | 2TB |
| Memory Components | 3D NAND |
| Interface | PCI-Express 3.0 x4, NVMe 1.3 |
| Controller | SMI SM2262EN |
| Max Sequential Read | Up to 3500 MBps |
| Max Sequential Write | Up to 3000 MBps |
| 4KB Random Read | Up to 360,000 IOPS |
| 4KB Random Write | Up to 360,000 IOPS |
| Terabytes Written (TBW) | 1280TB |
| MTBF | 2,000,000 hours |
| HeatSink | with HeatSink |
| Power Consumption (Idle) | 0.14W |
| Power Consumption (Active) | 0.33W |
| Operating Temperature | 0°C ~ +70°C |
| Storage Temperature | -40°C ~ +85°C |
| Max Shock Resistance | 1500G |
| Height | 6.10mm |
| Width | 22.00mm |
| Depth | 80.00mm |
| Weight | 11.00g |
Versi lain model ini
Keluarga yang sama, memori, penyejuk atau kelajuan jam yang berbeza — bandingkan sebelum membuat keputusan.
Check that the drive is detected at PCIe 3.0 x4 speed in BIOS or Device Manager, then run a benchmark to confirm sequential reads near 3500 MB/s and writes near 3000 MB/s with random IOPS around 360000.
The box contains the M.2 2280 SSD with its integrated heatsink already attached; you must provide a compatible M.2 slot and, if your motherboard lacks a mounting standoff, the correct screw.
The 2TB model offers 1280 TBW endurance and up to 3500/3000 MB/s speeds, making it the largest capacity in the S11 Pro line for sustained high-demand workloads.
Juga di rak ini
Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.
Apa yang anda hantar untuk membayar, dan mata wang yang anda guna untuk membaca harga.
Dihantar daripada dompet anda semasa semak keluar
Untuk paparan sahaja — katalog diberi harga dalam USD
Tiada mata wang yang sepadan.
Pilih bahasa yang digunakan oleh laman web ini.
Tiada bahasa yang sepadan.
Pengguna baharu?
Sudah mempunyai akaun?
Tiada set semula automatik: kedai ini tidak menghantar sebarang e-mel, jadi tiada pautan sekali guna untuk diminta. Biarkan alamat pada akaun tersebut, ia akan diuruskan secara manual.
Permintaan direkodkan
Tiada apa-apa akan sampai ke peti masuk anda — kedai ini tidak menghantar sebarang e-mel. Seseorang akan menguruskannya secara manual.
Sudah teringat?