Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Green PCB memory module with gold edge contacts and black heat spreader label

A-Tech

A-Tech 128GB DDR4 2400 ECC LRDIMM 819415-001 server RAM

SKU CH-29WX-M7F5P

128 GB DDR4 2400 ECC load-reduced DIMM for HP 819415-001, 809086-091 and 809208-B21 servers

  • Capacity128GB
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredLoad Reduced
  • 128GB capacity handles large server workloads
  • ECC LRDIMM design reduces electrical load on memory bus
  • DDR4 2400MHz speed delivers PC4-19200 bandwidth
  • CL17 latency at 1.20V optimises power efficiency
  • 8Rx4 3DS/TSV architecture enables high-density 128GB module

128GB DDR4 2400 ECC LRDIMM Module

This 128GB DDR4 2400 ECC LRDIMM module is built for servers and workstations that require high-density registered memory. It operates at PC4-19200 speed with a CAS latency of 17 and runs at the standard 1.20V voltage. The load-reduced design helps reduce electrical load on the memory controller in multi-module configurations.

Who This Suits and Who Should Look Elsewhere

This module suits administrators upgrading HP systems referencing part numbers 819415-001, 809086-091 or 809208-B21 where a single 128GB LRDIMM is qualified. It is not for desktop PCs or laptops that only accept unbuffered UDIMMs or SODIMMs. Buyers who need non-ECC memory or standard registered DIMMs instead of load-reduced modules should look elsewhere.

288-Pin DDR4 DIMM Form Factor

The module uses the 288-pin DDR4 DIMM form factor required by compatible server motherboards. Verify that your system board supports DDR4 LRDIMM technology and 128GB density per slot before purchase. The 2S4Rx4 (8Rx4) 3DS/TSV rank structure must match the platform memory population rules.

Pluspunten

  • 128GB capacity handles large server workloads
  • ECC LRDIMM design reduces electrical load on memory bus
  • DDR4 2400MHz speed delivers PC4-19200 bandwidth
  • CL17 latency at 1.20V optimises power efficiency
  • 8Rx4 3DS/TSV architecture enables high-density 128GB module

Specificaties

BrandA-Tech
SeriesCompatible Replacement for HP
Model819415-001, 809086-091, 809208-B21
Capacity128GB
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Voltage1.20V
ECCYes
Buffered/RegisteredLoad Reduced
Rank2S4Rx4 (8Rx4)
ChipsetMajor Brand Chipset
Features819415-001, 809086-091, 809208-B21

Vragen over dit artikel

How much power does the 128GB DDR4 2400 LRDIMM draw at its rated 1.20V?

The module operates at the standard DDR4 voltage of 1.20V. As a Load Reduced DIMM, it reduces electrical load on the memory bus, which helps manage overall system power draw in dense configurations.

What motherboard slot and CPU memory controller are required for this 288-pin DDR4 ECC LRDIMM?

This module requires a server or workstation motherboard with DDR4 288-pin DIMM slots and a CPU memory controller that supports ECC Load Reduced DIMMs at 2400MHz.

Can this 8Rx4 3DS/TSV LRDIMM run alongside existing RDIMMs in the same HP server?

No. Load Reduced DIMMs use a different buffering architecture than standard RDIMMs. Mixing LRDIMMs with RDIMMs is not supported and will prevent the system from booting.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.