Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Green 288-pin DDR4 LRDIMM module, no heat spreader

A-Tech

A-Tech 128GB DDR4 2933 ECC LRDIMM Server RAM

SKU CH-3PE5-W4P9Q

High-capacity 128GB DDR4 2933MHz ECC LRDIMM server memory module with CL21 latency and 1.2V operation

  • Capacity128GB
  • Type288-Pin DDR4 SDRAM
  • SpeedDDR4 2933 (PC4 23400)
  • CAS LatencyCL21
  • Voltage1.20V
  • ECCYes
  • 128 GB single module expands server memory capacity
  • DDR4 2933 MHz PC4-23400 delivers high-speed data throughput
  • ECC Load Reduced DIMM protects data integrity under heavy loads
  • 20 V standard voltage keeps power draw efficient
  • 288-pin DIMM form factor fits compatible server slots

128GB DDR4 LRDIMM for Servers

This module delivers 128GB of DDR4 2933 ECC Load Reduced memory in a single 288-pin DIMM. It targets administrators upgrading compatible server platforms that require registered LRDIMM architecture for high-capacity configurations.

Verify Platform LRDIMM Support

Confirm the server motherboard and processor support DDR4 LRDIMM modules at 2933MT/s with CL21 timing and 1.20V operation. The 4DRx4/4Rx4 rank structure demands specific memory controller capability; mixing with standard RDIMM or UDIMM types will prevent boot.

Single-Module Capacity Expansion

Each 128GB stick occupies one DIMM slot, freeing remaining slots for further expansion within the platform's maximum memory limit. The Load Reduced design reduces electrical load on the memory bus, allowing higher total system capacities than standard registered DIMMs in supported servers.

Pluspunten

  • 128 GB single module expands server memory capacity
  • DDR4 2933 MHz PC4-23400 delivers high-speed data throughput
  • ECC Load Reduced DIMM protects data integrity under heavy loads
  • 20 V standard voltage keeps power draw efficient
  • 288-pin DIMM form factor fits compatible server slots

Specificaties

BrandA-Tech
SeriesHynix RAM Equivalent Replacement Memory
ModelHMABAGL7ABR4N-WM, HMABAGL7MBR4N-WM
Part NumberHMABAGL7ABR4N-WM, HMABAGL7MBR4N-WM
Capacity128GB
Type288-Pin DDR4 SDRAM
SpeedDDR4 2933 (PC4 23400)
CAS LatencyCL21
Voltage1.20V
ECCYes
Buffered/RegisteredLoad Reduced
Rank4DRx4/4Rx4
ChipsetMajor Brand Chipset
Heat SpreaderNo
FeaturesEquivalent Replacement for Hynix HMABAGL7ABR4N-WM, HMABAGL7MBR4N-WM

Vragen over dit artikel

What comes in the box and do I need to buy anything else to install this module?

The box contains one 128GB 288-pin DDR4 LRDIMM module; no extra parts are required for installation.

Which capacity or version should I pick if my server supports 128GB DDR4 2933 LRDIMM slots?

Choose this single 128GB module rated at 2933 MT/s, CL21, 1.20 V, 4DRx4/4Rx4 to match those specifications.

What does the 2933 MHz rating mean for actual server performance?

The module runs at 2933 MT/s with CL21 latency at standard 1.20 V, providing ECC load-reduced operation for data integrity in compatible servers.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.