Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Two green DDR3 ECC RDIMM modules with gold contacts

A-Tech

A-Tech 16GB (2x8GB) DDR3 1600 ECC RDIMM 2Rx4 Server RAM

SKU CH-CA1Y-M82R3

A 16 GB dual-channel DDR3 ECC registered server memory kit running at 1600 MHz with CL11 latency

  • Capacity16GB (2 x 8GB)
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered

Capacity 16GB (2 x 8GB)

Speed DDR3 1600 (PC3 12800)

  • 16 GB dual-channel kit expands server memory capacity
  • ECC registered DIMMs protect data integrity in critical workloads
  • DDR3 1600 MHz speed accelerates application responsiveness
  • 2Rx4 dual-rank organisation increases memory density per slot
  • 5 V standard voltage ensures broad platform compatibility

Server DDR3 ECC RDIMM Kit

This 16 GB kit contains two 8 GB registered DIMMs built for DDR3 servers and workstations. Each module runs at 1600 MHz with CL11 latency at 1.5 V. ECC and registered buffering protect data integrity in multi-socket systems.

Upgrade from non-ECC or slower DDR3

The jump is worth it when your workload demands error correction and registered signalling for stability under sustained load. It replaces unbuffered or lower-speed DDR3 that cannot meet server-grade reliability requirements.

Dual-channel 240-pin registered DIMMs

Installation requires a platform that supports DDR3 RDIMM memory with 240-pin slots and dual-channel architecture. The kit frees you from mixing modules of different ranks or speeds, ensuring matched pairs for consistent throughput.

Pluspunten

  • 16 GB dual-channel kit expands server memory capacity
  • ECC registered DIMMs protect data integrity in critical workloads
  • DDR3 1600 MHz speed accelerates application responsiveness
  • 2Rx4 dual-rank organisation increases memory density per slot
  • 5 V standard voltage ensures broad platform compatibility

Specificaties

BrandA-Tech
SeriesA-Tech DDR3 Server Memory RAM
ModelA-Tech 8GB 2Rx4 PC3-12800R
Capacity16GB (2 x 8GB)
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Multi-channel KitDual Channel Kit
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Andere versies van dit model

Nog 5 in dezelfde serie

Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.

Vragen over dit artikel

Does this kit fit a 240-pin DDR3 registered DIMM slot?

Yes, each module is a 240-pin DDR3 DIMM designed for server and workstation boards that accept registered ECC memory.

What is the correct way to seat both modules for dual-channel operation?

Install the two 8 GB sticks in the matching channel slots indicated in your system manual; the registered buffer requires firm, even pressure until the retention clips click.

Will the 1.5 V DDR3 modules need any firmware or voltage adjustment later?

No, they run at the standard 1.5 V DDR3 voltage with CL11 timing; no further configuration is required after installation.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.