Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Four green DDR3L 240-pin UDIMM sticks with black chips

A-Tech

A-Tech 16GB (4x4GB) DDR3L 1600 ECC UDIMM 2Rx8 1.35V Quad Kit server RAM

SKU CH-P0ER-V95H3

A 16 GB quad-channel kit of four 4 GB DDR3L 1600 ECC unbuffered DIMMs at 1.35 V for servers and workstations

  • Capacity16GB (4 x 4GB)
  • SpeedDDR3L 1600 (PC3L 12800)
  • CAS LatencyCL11
  • Voltage1.35V
  • ECCYes
  • Buffered/RegisteredUnbuffered

Capacity 16GB (4 x 4GB)

Speed DDR3L 1600 (PC3L 12800)

  • ECC protection prevents data errors in critical workloads
  • 35 V DDR3L cuts power draw versus standard 1.5 V DDR3
  • 1600 MHz CL11 speed accelerates server responsiveness
  • Quad-channel 4×4 GB kit delivers 16 GB total capacity
  • 240-pin UDIMM form factor fits compatible DDR3 servers and workstations

Server DDR3L quad kit

This 16GB kit contains four 4GB ECC unbuffered DIMMs rated at DDR3L 1600 with CL11 timing. It runs at 1.35V and uses a 240-pin form factor designed for servers and workstations that support DDR3 ECC UDIMM memory. The dual-rank x8 organisation helps maximise density per channel.

For DDR3L ECC platforms only

The modules suit administrators upgrading compatible DDR3 servers or workstations that accept unbuffered ECC memory at 1.35V. Builders using desktop or laptop systems, or platforms requiring registered or load-reduced DIMMs, cannot use this kit.

1.35V DDR3L voltage decides fit

Each module operates at 1.35V and can also run at 1.5V, so the platform must support DDR3L low-voltage operation. Verify the system manual for supported voltage and ECC UDIMM requirements before installation.

Pluspunten

  • ECC protection prevents data errors in critical workloads
  • 35 V DDR3L cuts power draw versus standard 1.5 V DDR3
  • 1600 MHz CL11 speed accelerates server responsiveness
  • Quad-channel 4×4 GB kit delivers 16 GB total capacity
  • 240-pin UDIMM form factor fits compatible DDR3 servers and workstations

Specificaties

BrandA-Tech
SeriesA-Tech DDR3 Server Memory RAM
ModelA-Tech 4GB 2Rx8 PC3L-12800E
Capacity16GB (4 x 4GB)
SpeedDDR3L 1600 (PC3L 12800)
CAS LatencyCL11
Voltage1.35V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
Multi-channel KitQuad Channel Kit
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Andere versies van dit model

Nog 5 in dezelfde serie

Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.

Vragen over dit artikel

How can I confirm the kit is running at the correct speed and voltage after installation?

Check the BIOS or a system information tool to verify the modules report DDR3L 1600 MHz at 1.35V with ECC active.

What does the quad-channel kit include and is anything else required?

The package contains four 4 GB DDR3L ECC UDIMM modules (240-pin, 2Rx8, CL11). No extra components are needed if the server supports DDR3 ECC unbuffered memory.

When should I choose this 16 GB quad kit over a different capacity?

Select this kit when your server or workstation has four available DIMM slots and the manufacturer specifies 16 GB as the supported configuration for DDR3L 1600 ECC unbuffered memory.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.