Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Green circuit board DDR3 ECC RDIMM server memory module 240-pin

A-Tech

A-Tech 16GB DDR3 1600 ECC RDIMM 2Rx4 server RAM

SKU CH-GR08-5CFHD

16 GB DDR3 1600 ECC registered DIMM with 2Rx4 organisation for server upgrades

  • Capacity16GB
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 16 GB DDR3-1600 ECC RDIMM boosts server capacity
  • CL11 latency and 1.50 V keep workloads responsive
  • Registered 2Rx4 design protects data integrity
  • 240-pin DIMM fits standard DDR3 server slots
  • Rigorously tested for dependable enterprise operation

Server DDR3 ECC RDIMM

This is a 16GB DDR3 1600MHz ECC registered DIMM built for server and workstation platforms. It operates at 1.5V with CL11 latency and uses a 2Rx4 rank configuration on a 240-pin form factor.

Suits registered memory slots only

The module requires a motherboard that supports DDR3 registered ECC memory with 2Rx4 organisation. Systems limited to unbuffered UDIMMs or those capped at lower densities will not accept this stick.

Check DDR3 RDIMM support

Verify that your board lists DDR3 1600 registered ECC DIMMs in its qualified vendor list and that the 2Rx4 rank layout is permitted. Confirm the memory controller voltage is 1.5V before ordering.

Pluspunten

  • 16 GB DDR3-1600 ECC RDIMM boosts server capacity
  • CL11 latency and 1.50 V keep workloads responsive
  • Registered 2Rx4 design protects data integrity
  • 240-pin DIMM fits standard DDR3 server slots
  • Rigorously tested for dependable enterprise operation

Specificaties

BrandA-Tech
SeriesCompatible Replacement for Hynix
ModelHMT82GV7MMR4C-PB
Capacity16GB
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor Brand Chipset
FeaturesHMT82GV7MMR4C-PB

Vragen over dit artikel

Does my server need a DDR3 240-pin RDIMM slot to install this 16GB ECC module?

Yes, this is a DDR3 240-pin registered DIMM that requires a compatible server or workstation motherboard with RDIMM slots supporting ECC memory.

Can I mix this 2Rx4 registered ECC stick with existing unbuffered UDIMMs in the same system?

No, registered RDIMMs and unbuffered UDIMMs cannot be mixed; the motherboard must support registered ECC memory for this module to function.

How can I confirm the module is running at the correct 1600 MHz speed and CL11 latency after installation?

Check the BIOS memory settings or use a system information tool such as CPU-Z to verify the reported speed shows 1600 MT/s and CAS latency of 11.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.