Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Green rectangular circuit board with gold edge connectors and black memory chips

A-Tech

A-Tech 16GB DDR3 1866MHz ECC RDIMM 2Rx4 Server Memory

SKU CH-Y88G-VBJT5

16 GB DDR3 ECC registered DIMM running at 1866 MHz with CL13 latency and 1.5 V

  • Capacity16GB
  • SpeedDDR3 1866 (PC3 14900)
  • CAS LatencyCL13
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 16GB capacity expands server memory for heavier workloads
  • DDR3 1866MHz speed delivers high data throughput for demanding applications
  • ECC RDIMM design detects and corrects data errors automatically
  • Registered 2Rx4 architecture reduces electrical load on the memory controller
  • 5V standard voltage ensures broad DDR3 platform compatibility

Server Memory Upgrade

This A-Tech module is a 16GB DDR3 1866MHz ECC Registered DIMM built as a compatible replacement for Micron MT36JSF2G72PZ-1G9N1KG. It operates at 1.5V with CL13 latency and a 2Rx4 rank configuration on a 240-pin form factor.

Suited for Servers and Workstations

The registered design with ECC suits servers and workstations that require error correction and signal buffering for stability. Desktop boards that accept only unbuffered non-ECC UDIMMs cannot use this module.

16GB Capacity Headroom

A single 16GB stick adds substantial capacity for virtualisation, databases or multi-user workloads on compatible DDR3 platforms. Systems limited to lower per-slot maximums or requiring higher frequencies than 1866MHz will not benefit fully.

Pluspunten

  • 16GB capacity expands server memory for heavier workloads
  • DDR3 1866MHz speed delivers high data throughput for demanding applications
  • ECC RDIMM design detects and corrects data errors automatically
  • Registered 2Rx4 architecture reduces electrical load on the memory controller
  • 5V standard voltage ensures broad DDR3 platform compatibility

Specificaties

BrandA-Tech
SeriesCompatible Replacement for Micron
ModelMT36JSF2G72PZ-1G9N1KG
Capacity16GB
SpeedDDR3 1866 (PC3 14900)
CAS LatencyCL13
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMicron Chipset
FeaturesMT36JSF2G72PZ-1G9N1KG

Vragen over dit artikel

Does my server need a 240-pin DDR3 RDIMM slot to accept this module?

Yes, the module is a 240-pin DDR3 DIMM and requires a matching registered DIMM slot on the motherboard.

Will this CL13 1866 MHz module run at its rated speed when installed beside slower DDR3 RDIMMs?

The server will typically clock all installed modules to the speed of the slowest module present.

How can I verify the module is recognised as 16 GB ECC registered memory after installation?

Check the BIOS memory summary or run a system-information tool; it should report 16 GB, DDR3 1866, ECC registered, 2Rx4 organisation.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.