Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Green rectangular DDR3L server DIMM with black chips and gold contacts

A-Tech

A-Tech 16GB DDR3L 1600 ECC RDIMM 2Rx4 1.35V for Micron MT36KDZS2G72PZ-1G6E1 Server Memory

SKU CH-WSGF-E9G03

16GB DDR3L 1600 ECC registered server memory module with 2Rx4 organisation and 1.35V low-voltage operation

  • Capacity16GB
  • SpeedDDR3L 1600 (PC3L 12800)
  • CAS LatencyCL11
  • Voltage1.35V
  • ECCYes
  • Buffered/RegisteredRegistered
  • ECC protection guards data integrity with registered DDR3L architecture
  • Low 1.35V operation cuts server power draw and heat output
  • 16GB capacity expands memory headroom for virtualisation and databases
  • 1600MHz CL11 speed delivers responsive throughput for demanding workloads
  • Direct replacement for Micron MT36KDZS2G72PZ-1G6E1 ensures drop-in compatibility

A-Tech 16GB DDR3L 1600 ECC RDIMM Server Memory

This module is a 16GB DDR3L registered DIMM built for server and workstation platforms. It runs at 1600MHz with a CAS latency of CL11 and operates at 1.35V. The 2Rx4 organisation and Micron chipset match the listed Micron part numbers for direct replacement.

Suits maintainers upgrading validated DDR3L

It fits systems qualified for the Micron MT36KDZS2G72PZ-1G6E1 family and equivalent part numbers. Buyers whose hardware requires unbuffered memory, non-ECC operation, or a different voltage should not use this module.

Registered ECC with 2Rx4 organisation at 1.35V

The combination of ECC error correction, registered buffering and 2Rx4 rank architecture determines compatibility with the target server chipsets. Verify that your system specification calls for registered DDR3L ECC before ordering.

Pluspunten

  • ECC protection guards data integrity with registered DDR3L architecture
  • Low 1.35V operation cuts server power draw and heat output
  • 16GB capacity expands memory headroom for virtualisation and databases
  • 1600MHz CL11 speed delivers responsive throughput for demanding workloads
  • Direct replacement for Micron MT36KDZS2G72PZ-1G6E1 ensures drop-in compatibility

Specificaties

BrandA-Tech
SeriesCompatible Replacement for Micron
ModelMT36KDZS2G72PZ-1G6E1, MT36KSF2G72PZ-1G6E1F, MT36KSF2G72PZ-1G6E1FE, MT36KSF2G72PZ-1G6E1FF, MT36KSF2G72PZ-1G6E1FG
Capacity16GB
SpeedDDR3L 1600 (PC3L 12800)
CAS LatencyCL11
Voltage1.35V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMicron Chipset
FeaturesMT36KDZS2G72PZ-1G6E1, MT36KSF2G72PZ-1G6E1F, MT36KSF2G72PZ-1G6E1FE, MT36KSF2G72PZ-1G6E1FF, MT36KSF2G72PZ-1G6E1FG

Vragen over dit artikel

What does the 16GB DDR3L 1600 rating mean once the module is installed in a server?

The module provides 16GB of registered ECC capacity at 1600 MT/s with CL11 latency, operating at 1.35V for lower power draw in compatible DDR3L slots.

What does the DDR3L 1600 (PC3L 12800) interface cap in practice?

The DDR3L 1600 interface limits the module to 1600 MT/s maximum transfer rate; the system memory controller will negotiate the highest common speed supported by the CPU and other installed DIMMs.

What physical slot and clearance does the 240-pin RDIMM need to fit?

The module uses a standard 240-pin DDR3 DIMM form factor with registered buffering; it requires a DDR3 RDIMM slot and sufficient vertical clearance for the 2Rx4 chip layout.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.