Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Green 288-pin DDR4 RDIMM module with black chips and gold contacts

A-Tech

A-Tech 16GB DDR4 2400 ECC RDIMM CL17 1.2V 1Rx4 Server Memory

SKU CH-TNZH-FR9DT

16 GB DDR4 2400 ECC registered DIMM with CL17 latency and 1.2 V operation

  • Capacity16GB
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 16GB capacity handles heavy server workloads
  • DDR4 2400 speed delivers PC4-19200 bandwidth
  • ECC registered design corrects data errors automatically
  • 2V standard voltage reduces power draw
  • 288-pin RDIMM fits compatible server slots

Server ECC RDIMM for workstation upgrades

This 16 GB DDR4 module operates at 2400 MHz with CL17 latency and a registered design. It uses a 1Rx4 organisation and Major Brand Chips to deliver error-correcting memory for compatible server and workstation platforms.

Standard DDR4 voltage and registered buffering

The module runs at the standard 1.2 V DDR4 voltage while the registered buffer reduces electrical load on the memory controller. ECC functionality detects and corrects single-bit errors to maintain data integrity under sustained workloads.

288-pin DIMM form factor determines fit

This stick uses the 288-pin DDR4 DIMM layout required by supporting server and workstation motherboards. Systems that accept only unbuffered UDIMMs or a different pin count will not be compatible with this registered module.

Pluspunten

  • 16GB capacity handles heavy server workloads
  • DDR4 2400 speed delivers PC4-19200 bandwidth
  • ECC registered design corrects data errors automatically
  • 2V standard voltage reduces power draw
  • 288-pin RDIMM fits compatible server slots

Specificaties

BrandA-Tech
Capacity16GB
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx4
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Vragen over dit artikel

How do I install this DDR4 2400 288-pin RDIMM and what step is often missed?

Align the notch on the 288-pin module with the slot key, press firmly until both retention clips click, then verify in BIOS that the server recognises the 16 GB at 2400 MHz with ECC active.

What maintenance or replacement will this 1Rx4 registered module need later?

No routine maintenance is required; if a memory error appears, run the server's built-in diagnostics to isolate the faulty 16 GB stick and replace it with an identical DDR4 2400 ECC RDIMM.

What limit appears first when this CL17 1.2 V module runs sustained workloads?

The CAS latency of 17 cycles at 2400 MHz sets the response-time floor, so sustained throughput is bounded by that timing rather than the 1.2 V power envelope.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.