Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Green 288-pin DDR4 RDIMM module with black chips and gold contacts

A-Tech

A-Tech 16GB DDR4 2400MHz ECC RDIMM 1Rx4 288-Pin Server RAM

SKU CH-BSFY-TTC0Z

16 GB DDR4 2400 MHz ECC registered DIMM with 1Rx4 organisation for Cisco servers

  • Capacity16GB
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredRegistered
  • ECC protection prevents data corruption in critical workloads
  • Registered design stabilises signal integrity on dense server boards
  • 16 GB capacity at DDR4 2400 MHz expands memory headroom for virtualisation
  • 1Rx4 single-rank layout keeps electrical loading low per channel
  • 2 V standard voltage reduces power draw and heat output

Cisco UCS Compatible DDR4 RDIMM

This 16 GB DDR4 2400 MHz ECC registered DIMM replaces Cisco part numbers 15-104066-01 and UCS-MR-1X161RV-A in supported server and workstation platforms. It delivers 1Rx4 organisation at the standard 1.20 V operating voltage for reliable memory expansion.

288-Pin DIMM Installation Notes

The module uses the industry-standard 288-pin DDR4 DIMM form factor and seats like any registered ECC DIMM in compatible slots. Builders must confirm the platform accepts registered ECC memory and supports the stated speed; systems limited to unbuffered or non-ECC modules will not function with this stick.

Sustained Load Behaviour

Registered buffering and on-die ECC maintain data integrity during continuous workloads typical of virtualisation hosts and database servers. The 1.20 V rating keeps power draw predictable over long runs, while major-brand DRAM chips provide stability without throttling under extended utilisation.

Pluspunten

  • ECC protection prevents data corruption in critical workloads
  • Registered design stabilises signal integrity on dense server boards
  • 16 GB capacity at DDR4 2400 MHz expands memory headroom for virtualisation
  • 1Rx4 single-rank layout keeps electrical loading low per channel
  • 2 V standard voltage reduces power draw and heat output

Specificaties

BrandA-Tech
SeriesCompatible Replacement for Cisco
Model15-104066-01, UCS-MR-1X161RV-A
Capacity16GB
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx4
ChipsetMajor Brand Chipset
Features15-104066-01, UCS-MR-1X161RV-A

Vragen over dit artikel

How do I confirm the module is running at DDR4 2400 MHz with ECC active after installation?

Enter the system BIOS or UEFI and verify the memory speed reads 2400 MHz (PC4-19200), CAS latency shows CL17, voltage is 1.20 V, and ECC status is reported as enabled for the 1Rx4 registered DIMM.

What is included in the box and do I need any extra parts to install this 288-pin DIMM?

The box contains one 16 GB DDR4 2400 MHz ECC RDIMM (1Rx4, 288-pin). No additional cables, brackets or cooling parts are required; the module installs directly into a compatible server DIMM slot.

Which capacity and rank version should I choose for a Cisco UCS server that lists part numbers 15-104066-01 or UCS-MR-1X161RV-A?

Select this 16 GB 1Rx4 registered ECC module; it is the direct compatible replacement for both Cisco part numbers 15-104066-01 and UCS-MR-1X161RV-A.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.