A-Tech
A-Tech 16GB DDR5 4800 ECC RDIMM 1Rx8 HP 340K1AA P43322-B21 P48499-001 P43324-0A1 server RAM
16GB DDR5 4800 ECC registered DIMM with 1Rx8 organisation and 1.10V operation
- Capacity16GB
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 4800 (PC5 38400)
- CAS Latency40
- Voltage1.10V
- ECCYes
- ECC protection guards data integrity with registered DDR5 architecture
- 4800 MHz speed accelerates server workloads at PC5-38400 bandwidth
- 16 GB capacity expands memory headroom for virtualisation and databases
- 10 V DDR5 standard voltage reduces power draw per module
- Direct replacement for HP part numbers 340K1AA P43322-B21 P48499-001 P43324-0A1
16GB DDR5 4800 ECC RDIMM Server Memory
This A-Tech 16GB DDR5 4800 ECC RDIMM is a registered server memory module built for HP and HPE systems. It operates at 4800MHz with a CAS latency of 40 and a standard 1.10V voltage. The 288-pin DIMM uses a 1Rx8 rank configuration and major brand DRAM chips. It serves as a direct replacement for HP part numbers 340K1AA, P43322-B21, P48499-001 and P43324-0A1.
Suited for HP server upgrades not general desktop
This module fits administrators upgrading compatible HP or HPE servers and workstations that require registered ECC memory. It is not suitable for standard desktop motherboards which typically use unbuffered non-ECC DIMMs. Builders needing higher capacities per slot or different rank configurations should verify their platform requirements before purchase.
Registered ECC DDR5 4800 1Rx8 compatibility
The registered ECC RDIMM design with 1Rx8 organisation is the single specification that determines whether this module works in a given system. Only platforms that explicitly support DDR5 registered ECC memory at 4800MHz with this rank structure can use it. Consult the system manual for approved memory seating and channel guidelines.
Pluspunten
- ECC protection guards data integrity with registered DDR5 architecture
- 4800 MHz speed accelerates server workloads at PC5-38400 bandwidth
- 16 GB capacity expands memory headroom for virtualisation and databases
- 10 V DDR5 standard voltage reduces power draw per module
- Direct replacement for HP part numbers 340K1AA P43322-B21 P48499-001 P43324-0A1
Specificaties
| Brand | A-Tech |
|---|---|
| Series | Compatible Replacement for HP/HPE 340K1AA P43322-B21 P48499-001 P43324-0A1 |
| Model | A-Tech 16GB DDR5-4800 ECC RDIMM Server RAM Module |
| Capacity | 16GB |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 4800 (PC5 38400) |
| CAS Latency | 40 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx8 |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Features | Major Brand DRAM IC Chips |
Vragen over dit artikel
How do I install this 288-pin DDR5 RDIMM and which step is commonly missed?
Align the notch on the module with the slot key, press firmly until both retention clips click, then verify the system detects all 16GB in the BIOS memory map.
What maintenance or replacement will this ECC RDIMM need during its service life?
No scheduled maintenance is required; if a correctable error count rises or the module fails POST, replace the 1Rx8 stick with an identical DDR5 4800 part.
What limit appears first when this 1.10V module runs under sustained load?
The CAS latency of 40 cycles at 4800 MT/s sets the timing ceiling before thermal throttling becomes a factor on this unbuffered heat-spreaderless design.
Ook in deze afdeling
Klanten vergeleken ook
Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.



