Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen

A-Tech

A-Tech 32GB (2x16GB) DDR3 1866 ECC RDIMM 2Rx4 Server RAM

SKU CH-K87N-GFDAH

32 GB dual-channel DDR3 1866 ECC registered server memory kit with 16 GB modules, CL13 latency and 1.5 V operation

  • Capacity32GB (2 x 16GB)
  • SpeedDDR3 1866 (PC3 14900)
  • CAS LatencyCL13
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered

Capacity 32GB (2 x 16GB)

  • 32 GB dual-channel kit expands server memory capacity
  • DDR3 1866 MHz speed accelerates data throughput
  • ECC registered design detects and corrects memory errors
  • 2Rx4 dual-rank organisation optimises signal integrity
  • CL13 latency at 1.5 V delivers efficient operation

Server DDR3 32GB Kit

This A-Tech kit supplies 32GB of DDR3 1866 registered ECC memory in two 16GB modules. It is built for servers and workstations that require 240-pin RDIMM modules with dual-rank x4 organisation. The kit runs at standard 1.5V with CL13 latency. Desktop and laptop systems cannot use these modules.

Upgrade From Lower Capacity DDR3

The dual-channel kit replaces smaller DDR3 RDIMM configurations or slower DDR3 speeds in compatible platforms. The jump is worthwhile when workloads exceed the current memory ceiling or when error-correcting registered memory is required for stability. Systems limited to lower densities or non-ECC memory will not benefit.

Capacity And Headroom

The 32GB total handles virtualisation hosts, database buffers and multi-user application servers with comfortable headroom. Large in-memory analytics or dense container deployments may exhaust the kit, requiring higher-density modules or additional populated channels. The registered design supports signal integrity at this density.

Pluspunten

  • 32 GB dual-channel kit expands server memory capacity
  • DDR3 1866 MHz speed accelerates data throughput
  • ECC registered design detects and corrects memory errors
  • 2Rx4 dual-rank organisation optimises signal integrity
  • CL13 latency at 1.5 V delivers efficient operation

Specificaties

BrandA-Tech
SeriesA-Tech DDR3 Server Memory RAM
ModelA-Tech 16GB 2Rx4 PC3-14900R
Capacity32GB (2 x 16GB)
SpeedDDR3 1866 (PC3 14900)
CAS LatencyCL13
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Multi-channel KitDual Channel Kit
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Andere versies van dit model

Nog 5 in dezelfde serie

Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.

Vragen over dit artikel

Will these 240-pin DDR3 DIMMs fit my server's registered memory slots?

Yes, the kit uses 240-pin DDR3 RDIMM form factor at 1.5V standard voltage, matching server and workstation slots that require registered ECC modules.

Do I need to populate specific channel slots for the dual-channel kit to work?

Install the two 16GB modules in the same coloured DIMM slots per your motherboard manual; the common mistake is placing them in adjacent slots instead of the matched channel pair.

When should I expect to replace these CL13 1866 MHz modules?

DDR3 RDIMMs have no moving parts and run at standard 1.5V; they typically last the life of the server unless a fault appears during testing.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.