Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Two green DDR4 ECC RDIMM sticks, 288-pin, no heat spreader

A-Tech

A-Tech 32GB (2x16GB) DDR4 2133 ECC RDIMM 1Rx4 Server RAM

SKU CH-9ERK-8KYJ2

A 32 GB dual-channel kit of registered ECC DDR4 RDIMMs running at 2133 MHz with CL15 latency for servers and workstations

  • Capacity32GB (2 x 16GB)
  • Type288-Pin DDR4 SDRAM
  • SpeedDDR4 2133 (PC4 17000)
  • CAS LatencyCL15
  • Voltage1.20V
  • ECCYes

Capacity 32GB (2 x 16GB)

  • ECC protection guards data integrity with registered DDR4 modules
  • 32GB dual-channel kit expands server capacity using two 16GB sticks
  • 2133 MHz DDR4 speed accelerates workloads at PC4-17000 bandwidth
  • CL15 latency at 1.20V delivers efficient registered performance
  • 288-pin RDIMM form factor fits compatible DDR4 server platforms

32GB DDR4 2133 ECC RDIMM kit

This 32GB kit contains two 16GB DDR4 2133 ECC Registered DIMMs built for servers and workstations. Each module runs at 1.20V with CL15 latency and a single-rank x4 organisation. The 288-pin form factor fits DDR4 RDIMM slots in compatible enterprise systems.

Upgrade from non-ECC or lower-capacity RDIMMs

Replacing unbuffered or non-ECC memory with this registered ECC kit adds error correction and signal buffering for data integrity under heavy workloads. The dual-channel pair increases total capacity to 32GB when the platform supports 16GB single-rank modules per slot.

Suits DDR4 servers needing registered ECC memory

Builders maintaining DDR4-based servers or workstations that require 1Rx4 RDIMMs at 2133 MT/s will find this kit a direct fit. Systems limited to unbuffered UDIMMs, desktop platforms, laptops or higher-speed DDR4 generations cannot use these modules.

Pluspunten

  • ECC protection guards data integrity with registered DDR4 modules
  • 32GB dual-channel kit expands server capacity using two 16GB sticks
  • 2133 MHz DDR4 speed accelerates workloads at PC4-17000 bandwidth
  • CL15 latency at 1.20V delivers efficient registered performance
  • 288-pin RDIMM form factor fits compatible DDR4 server platforms

Specificaties

BrandA-Tech
SeriesA-Tech DDR4 Server Memory RAM
ModelA-Tech 16GB 1Rx4 PC4-2133P-R
Part NumberAT16G2D4D2133RS4N12V
Capacity32GB (2 x 16GB)
Type288-Pin DDR4 SDRAM
SpeedDDR4 2133 (PC4 17000)
CAS LatencyCL15
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx4
Multi-channel KitDual Channel Kit
ChipsetMajor Brand Chipset
Heat SpreaderNo
FeaturesMajor Brand Chips / Error Correcting Technology for Server Systems

Andere versies van dit model

Nog 2 in dezelfde serie

Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.

Vragen over dit artikel

Will these 288-pin DDR4 RDIMMs fit my server's memory slots?

These are 288-pin DDR4 registered DIMMs, the standard form factor for DDR4 server platforms. They install only in DDR4 RDIMM slots.

What is the correct order for installing the two 16GB modules in a dual-channel kit?

Install one module per memory channel following your system manual's slot sequence, usually the same-coloured slots first, to enable dual-channel operation.

When should I expect to replace these ECC registered modules?

These modules have no heat spreader and run at standard 1.2V; they typically last the server's service life unless a correctable error count rises or a module fails.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.