Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Green 288-pin DDR5 RDIMM module with black chips, 32GB capacity

A-Tech

A-Tech 32GB DDR5 5600 ECC RDIMM 1Rx4 Server Memory

SKU CH-249M-CB1NE

A 32 GB DDR5 5600 ECC registered DIMM with CL40 latency and 1.1 V operation for server upgrades

  • Capacity32GB
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 32 GB capacity handles heavy server workloads
  • DDR5 5600 speed moves data at PC5-44800 bandwidth
  • ECC RDIMM with 1Rx4 rank corrects errors in registered design
  • 10 V standard voltage keeps power draw low
  • 288-pin DIMM form factor fits DDR5 server slots

32GB DDR5 ECC RDIMM for servers

This 32GB DDR5 5600 registered DIMM targets server and workstation administrators who need error-correcting memory for data integrity. The single-rank 1Rx4 organisation keeps electrical loading low on populated channels. It replaces the Hynix HMCG84AGBRA module in compatible platforms. Systems requiring non-ECC or unbuffered memory cannot use this module.

Registered buffer and ECC protect data flow

The registered design places a buffer between the memory controller and the DRAM, reducing signal loading on dense configurations. On-die ECC corrects single-bit errors inside the chip before data reaches the bus. Together they maintain throughput under sustained multi-threaded workloads. No additional software or drivers are required to activate these functions.

288-pin DIMM at standard DDR5 voltage

The module uses the industry-standard 288-pin DDR5 DIMM form factor and operates at 1.10V. Gold-edge contacts resist oxidation during long-term rack deployment. A single 32GB stick allows capacity scaling in one-module increments. Builders needing 262-pin SO-DIMM or desktop UDIMM form factors must select a different product.

Pluspunten

  • 32 GB capacity handles heavy server workloads
  • DDR5 5600 speed moves data at PC5-44800 bandwidth
  • ECC RDIMM with 1Rx4 rank corrects errors in registered design
  • 10 V standard voltage keeps power draw low
  • 288-pin DIMM form factor fits DDR5 server slots

Specificaties

BrandA-Tech
SeriesCompatible Replacement for Hynix
ModelHMCG84AGBRA
Capacity32GB
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx4 (EC8)
ChipsetMajor Brand Chipset
FeaturesHMCG84AGBRA

Vragen over dit artikel

Will the 1.10V DDR5 5600 module need any firmware updates or capacitor replacements over its service life?

No firmware or capacitor maintenance is required; the registered DIMM uses major-brand chips tested to A-Tech quality standards and is covered by a lifetime warranty.

What thermal or signal-integrity limit appears first when the 1Rx4 ECC RDIMM runs at 5600 MT/s continuously?

The registered buffer and on-die ECC maintain signal integrity at CL40, so the practical ceiling is the platform's DDR5 5600 memory-controller spec rather than the module itself.

How much heat and power does the 288-pin 32GB stick draw during all-day server workloads?

At the standard 1.10V DDR5 voltage the module draws only the power needed for 5600 MT/s operation, and the registered design keeps thermals within normal server DIMM limits.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.