Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Green circuit board 262-pin DDR5 SODIMM module with black memory chips no heat spreader

A-Tech

A-Tech 48GB DDR5 5600 ECC SODIMM 2Rx8 Server RAM

SKU CH-EEFD-WZJGJ

48GB DDR5 5600 ECC SODIMM with 2Rx8 organisation, 1.1V operation and CL40 latency for microserver upgrades

  • Capacity48GB
  • Type262-Pin DDR5 SO-DIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS Latency40
  • Voltage1.10V
  • ECCYes
  • 48GB capacity lets you run larger workloads in a single slot
  • DDR5 5600 speed delivers 44800 MT/s bandwidth for responsive multitasking
  • ECC unbuffered design detects and corrects memory errors automatically
  • 2Rx8 dual-rank organisation increases density without adding modules
  • 10V standard voltage keeps power draw low in microserver environments

Capacity and form factor

This is a single 48GB DDR5 SODIMM built to the 262-pin SO-DIMM standard. It delivers PC5-44800 speed at 5600 MHz with a CAS latency of 40 and operates at the standard 1.10V. The module uses a 2Rx8 rank configuration and includes on-die ECC for data integrity.

Suitable systems and limits

It fits microserver, server and workstation platforms that accept unbuffered ECC DDR5 SODIMMs and can address a 48GB rank. Builders whose boards require registered DIMMs, non-ECC memory, or a different pin count should look elsewhere. The lack of a heat spreader also means it relies on chassis airflow for cooling.

Build integration

The stick slots directly into any compatible 262-pin DDR5 SO-DIMM socket without extra power cables or adapters. Its unbuffered design keeps the memory controller simple, while ECC protects against single-bit errors in critical workloads. The 1.10V operation matches the DDR5 baseline, so no voltage tuning is required.

Pluspunten

  • 48GB capacity lets you run larger workloads in a single slot
  • DDR5 5600 speed delivers 44800 MT/s bandwidth for responsive multitasking
  • ECC unbuffered design detects and corrects memory errors automatically
  • 2Rx8 dual-rank organisation increases density without adding modules
  • 10V standard voltage keeps power draw low in microserver environments

Specificaties

BrandA-Tech
SeriesCompatible Replacement for Hynix HMCGY8MGBAB HMCGY8MGBAB250N
ModelA-Tech 48GB DDR5-5600 ECC SODIMM AIO RAM Module
Capacity48GB
Type262-Pin DDR5 SO-DIMM
SpeedDDR5 5600 (PC5 44800)
CAS Latency40
Voltage1.10V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
Heat SpreaderNo
FeaturesMajor Brand DRAM IC Chips

Vragen over dit artikel

My system only has 262-pin DDR5 SO-DIMM slots — will this 48 GB module fit?

Yes, the module is a 262-pin DDR5 SO-DIMM, so it physically fits any slot built for that form factor.

Can I keep my current DDR5-4800 ECC SODIMMs installed and add this DDR5-5600 2Rx8 module?

The system will run all modules at the lowest common speed, so the 5600 MT/s module will operate at 4800 MT/s alongside your existing memory.

How can I verify the module is running at DDR5-5600 with ECC active after installation?

Check the BIOS memory information or use a tool like CPU-Z; it should show 5600 MT/s, CL40, 1.10 V and ECC enabled for the new module.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.