Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen

A-Tech

A-Tech 4GB DDR2 667MHz 240-Pin desktop RAM

SKU CH-805J-5EK89

Dual-channel 4 GB DDR2 kit with two 2 GB modules running at 667 MHz, 1.8 V CL5, 240-pin unbuffered non-ECC DIMMs for desktop upgrades

  • Capacity4GB (2 x 2GB)
  • SpeedDDR2 667 (PC2 5300)
  • Tested Frequency667
  • Voltage1.80V
  • ECCNo
  • Buffered/RegisteredUnbuffered

Capacity 4GB (2 x 2GB)

Speed DDR2 667 (PC2 5300)

  • 4GB dual-channel kit expands multitasking headroom with two matched 2GB modules
  • DDR2 667MHz speed rated at PC2-5300 for responsive desktop performance
  • 8V standard DDR2 voltage keeps power draw within original platform limits
  • Non-ECC unbuffered DIMM design ensures broad compatibility with mainstream desktop boards
  • 240-pin form factor fits standard DDR2 desktop memory slots

A-Tech 4GB DDR2 667MHz desktop memory kit

This A-Tech kit supplies four gigabytes of DDR2 memory across two 2GB unbuffered DIMMs. It is built for desktop computers that accept 240-pin modules running at 667 MHz. The dual-channel configuration helps improve throughput on compatible platforms.

Compatibility check for DDR2 667MHz systems

The modules suit owners of older AMD or Intel desktops that specify DDR2 667 (PC2-5300) unbuffered non-ECC memory at 1.8V. Anyone whose board requires registered, ECC, or a different DDR generation should select a different product.

Deciding specification: DDR2 667MHz 240-pin DIMM

The single specification that determines fit is the DDR2 667MHz 240-pin DIMM form factor with 1.8V operation. If your motherboard calls for this exact combination the kit will install; if it calls for any other generation or pin count it will not.

Pluspunten

  • 4GB dual-channel kit expands multitasking headroom with two matched 2GB modules
  • DDR2 667MHz speed rated at PC2-5300 for responsive desktop performance
  • 8V standard DDR2 voltage keeps power draw within original platform limits
  • Non-ECC unbuffered DIMM design ensures broad compatibility with mainstream desktop boards
  • 240-pin form factor fits standard DDR2 desktop memory slots

Specificaties

BrandA-Tech
SeriesA-Tech DDR2 Desktop Memory RAM
Capacity4GB (2 x 2GB)
SpeedDDR2 667 (PC2 5300)
Tested Frequency667
Voltage1.80V
ECCNo
Buffered/RegisteredUnbuffered
Multi-channel KitDual Channel Kit
Recommend UseAMD & Intel Compatible

Andere versies van dit model

Nog 5 in dezelfde serie

Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.

Vragen over dit artikel

Will this kit fit a motherboard that only has DDR2 667 MHz slots?

Yes, the modules run at 667 MHz and use the standard 240-pin DDR2 DIMM form factor.

Is this memory compatible with a system that requires 1.8 V DDR2?

The kit operates at 1.8 V, matching the standard DDR2 voltage requirement.

Can I install these two modules in a dual-channel desktop board?

The kit is a matched 2 x 2 GB pair designed for dual-channel operation.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.