Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Green 240-pin DDR3 ECC RDIMM module with black chips and gold contacts

A-Tech

A-Tech 4GB DDR3-1333 ECC RDIMM 2Rx8 1.5V Server Memory

SKU CH-7YFH-R1JAT

4GB DDR3 1333MHz ECC registered server memory module with 2Rx8 organisation and 1.5V operation

  • Capacity4GB
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered
  • ECC protection prevents data corruption in critical server workloads
  • Registered design improves signal integrity for stable multi-module operation
  • DDR3-1333 speed delivers 10600 MT/s bandwidth for responsive performance
  • 2Rx8 dual-rank organisation increases memory density per DIMM slot
  • 5 V standard voltage ensures broad compatibility with DDR3 server platforms

4GB DDR3 ECC RDIMM for servers

This 4GB DDR3-1333 ECC registered DIMM is built for servers and workstations that require error-correcting memory. It operates at 1333 MHz with CL9 latency and standard 1.5V power. The module uses a 2Rx8 organisation and major-brand chips for dependable operation in compatible IBM-Lenovo systems.

Registered design and standard voltage

Registered buffering reduces electrical load on the memory controller, helping stability in multi-DIMM configurations. The 1.5V DDR3 standard voltage keeps power draw predictable without requiring special cooling. ECC functionality detects and corrects single-bit errors to protect data integrity during continuous workloads.

240-pin DIMM fits registered slots

The 240-pin form factor installs only in motherboards that support DDR3 registered ECC memory. Verify your system's qualified vendor list against the listed IBM-Lenovo part numbers before purchase. This single module leaves remaining slots free for additional capacity upgrades when the platform allows.

Pluspunten

  • ECC protection prevents data corruption in critical server workloads
  • Registered design improves signal integrity for stable multi-module operation
  • DDR3-1333 speed delivers 10600 MT/s bandwidth for responsive performance
  • 2Rx8 dual-rank organisation increases memory density per DIMM slot
  • 5 V standard voltage ensures broad compatibility with DDR3 server platforms

Specificaties

BrandA-Tech
Capacity4GB
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Vragen over dit artikel

How do I install this 240-pin DDR3 RDIMM and what step is often missed?

Power off the server, open the chassis, align the module key with the slot notch, press firmly until both retention clips lock, then verify in BIOS that the 4GB ECC registered module is detected at 1333MHz.

What maintenance or replacement will this 1.5V registered DIMM need over time?

No routine maintenance is required; if a memory error appears in system logs, reseat or replace the module, otherwise it runs for the server's service life.

What limit appears first when this CL9 2Rx8 module runs under sustained load?

The DDR3-1333 bandwidth ceiling and registered-buffer latency are the first constraints during continuous heavy workloads.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.