Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Green 240-pin DDR3 DIMM with black chips and silver edge contacts

A-Tech

A-Tech 4GB DDR3 1333MHz ECC RDIMM 1Rx4 Server RAM

SKU CH-ND16-66JHE

A 4GB DDR3 1333MHz ECC registered DIMM with 1Rx4 organisation and CL9 latency for compatible HP servers

  • Capacity4GB
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered
  • ECC protection prevents data corruption in server workloads
  • Registered design stabilises signal integrity on multi-module channels
  • 50 V standard voltage matches DDR3 platform requirements
  • 1333 MHz PC3-10600 speed delivers rated throughput for compatible systems
  • 240-pin DIMM form factor fits approved HP server slots

4GB DDR3 1333 ECC RDIMM

This 4GB DDR3 1333MHz ECC registered DIMM is built for HP server and workstation platforms that require registered memory with error correction. It suits administrators maintaining legacy systems where 1Rx4 organisation and 1.50V operation are specified.

Straightforward DIMM installation

The 240-pin module seats in standard DDR3 DIMM slots without extra cables or tools. Because it is a registered ECC part, the system BIOS must support registered memory; mixing it with unbuffered modules will prevent boot or disable ECC functions.

Verify registered ECC support first

Check that your server or workstation documentation lists DDR3 1333 registered ECC DIMMs and 1Rx4 rank configuration as supported. Systems limited to unbuffered non-ECC memory cannot use this module, and maximum capacity per slot may restrict total memory.

Pluspunten

  • ECC protection prevents data corruption in server workloads
  • Registered design stabilises signal integrity on multi-module channels
  • 50 V standard voltage matches DDR3 platform requirements
  • 1333 MHz PC3-10600 speed delivers rated throughput for compatible systems
  • 240-pin DIMM form factor fits approved HP server slots

Specificaties

BrandA-Tech
Capacity4GB
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx4
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Vragen over dit artikel

How can I verify the 4GB module is recognised as registered ECC memory after installation?

Open the system BIOS or UEFI and check that the module is listed as a 4GB registered DIMM with ECC active.

What comes in the package and what must be sourced separately?

The box contains one 4GB DDR3 1333 MHz 240-pin registered ECC DIMM; no cables, brackets or additional modules are included.

Which version should I choose when my server requires a 1Rx4 registered DIMM at 1.5V?

This single 4GB 1Rx4 module matches that exact specification.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.