Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Green printed circuit board with black memory chips and gold edge connectors

A-Tech

A-Tech 4GB DDR3 1600MHz ECC UDIMM 2Rx8 Server RAM

SKU CH-XT0Q-21TY4

4GB DDR3 1600MHz ECC UDIMM server memory module with CL11 latency and 1.5V operation

  • Capacity4GB
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredUnbuffered
  • ECC protection guards data integrity in server workloads
  • DDR3 1600 MHz speed delivers responsive multitasking
  • 4 GB capacity adds memory headroom for demanding tasks
  • 240-pin UDIMM form factor fits compatible HP server slots
  • Lifetime warranty and US-based support back every module

Compatible HP Server Upgrade

This 4GB DDR3 1600MHz ECC UDIMM module replaces specific HP part numbers including 662609-571, 662609-574, 669238-071, 669322-B21, 669322-B212, 682413-001, 684034-001 and A2H32AV. It uses a 240-pin DIMM form factor and operates at the standard 1.5V voltage for DDR3 memory.

For ECC UDIMM Slots Only

Suitable for servers and workstations that accept unbuffered ECC DDR3 memory at PC3-12800 speed. Builders needing registered DIMMs, higher capacities, or different voltage requirements should verify their system documentation before ordering.

2Rx8 Rank Configuration

The dual-rank 2Rx8 organisation with CL11 latency determines compatibility with the memory controller. Systems requiring single-rank modules or a different rank structure will not support this stick.

Pluspunten

  • ECC protection guards data integrity in server workloads
  • DDR3 1600 MHz speed delivers responsive multitasking
  • 4 GB capacity adds memory headroom for demanding tasks
  • 240-pin UDIMM form factor fits compatible HP server slots
  • Lifetime warranty and US-based support back every module

Specificaties

BrandA-Tech
Capacity4GB
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Voltage1.50V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Vragen over dit artikel

How much power does the 1.5V DDR3 module draw when the server runs all day?

The module operates at the standard DDR3 voltage of 1.5V; actual power draw depends on your server's workload and memory-controller efficiency.

What must my motherboard provide to run this 240-pin ECC UDIMM?

A DDR3 DIMM slot that supports unbuffered ECC memory at 1600 MHz and can accept a 2Rx8 4 GB module.

Will this CL11 DDR3 stick work alongside older CL9 DDR3 modules I already have?

The system will run all modules at the slowest common speed and highest latency; mixing CL11 with CL9 means the CL9 sticks will operate at CL11 timings.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.