Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Green 240-pin DDR3 RDIMM module with black chips

A-Tech

A-Tech 4GB DDR3 1866 ECC RDIMM 240-Pin 1Rx8 Supermicro Certified

SKU CH-EHTD-7T5KF

4 GB DDR3 1866 ECC registered RDIMM, CL13 at 1.5 V, single-rank 1Rx8 on 240 pins, Supermicro certified

  • Capacity4GB
  • SpeedDDR3 1866 (PC3 14900)
  • CAS LatencyCL13
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered
  • Supermicro certified for guaranteed server compatibility
  • 4 GB DDR3 1866 MHz single-rank module
  • ECC registered design protects data integrity
  • CL13 latency at standard 1.5 V operation
  • 240-pin RDIMM form factor fits DDR3 server slots

Supermicro Certified 4GB DDR3 Module

This 4GB DDR3 1866 ECC registered DIMM carries Supermicro certification for direct replacement in qualified servers and workstations. The module runs at PC3-14900 speed with CL13 latency and standard 1.50V operation.

1Rx8 Registered ECC For Enterprise Platforms

Suits administrators expanding memory in systems that require registered ECC DDR3 on a 240-pin interface. Builders needing unbuffered non-ECC modules, higher capacities per stick, or newer DDR generations should look elsewhere.

Single Rank CL13 At PC3-14900

The 1Rx8 organisation at CL13 determines electrical loading and timing compatibility with the memory controller. Verify the platform's qualified vendor list for this exact speed, rank and voltage before ordering.

Pluspunten

  • Supermicro certified for guaranteed server compatibility
  • 4 GB DDR3 1866 MHz single-rank module
  • ECC registered design protects data integrity
  • CL13 latency at standard 1.5 V operation
  • 240-pin RDIMM form factor fits DDR3 server slots

Specificaties

BrandSuperMicro
SeriesSupermicro Certified
ModelMEM-DR340L-HL04-ER18
Capacity4GB
SpeedDDR3 1866 (PC3 14900)
CAS LatencyCL13
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor Brand Chipset
FeaturesSupermicro Certified MEM-DR340L-HL04-ER18 (Hynix)

Vragen over dit artikel

Does this 240-pin RDIMM fit a standard DDR3 server DIMM slot?

Yes, the module uses the 240-pin RDIMM form factor and 1.5 V DDR3 standard voltage, so it fits any DDR3 registered DIMM slot keyed for that voltage.

What BIOS setting or installation step is commonly missed when adding this registered ECC module?

Enable ECC and registered memory support in the BIOS before booting; many users forget this and the system will not recognise the module.

When should the 4 GB DDR3 1866 CL13 module be replaced in a production server?

Replace it if memory diagnostics report correctable or uncorrectable ECC errors, or when a capacity upgrade requires higher-density DDR3 modules.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.