Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Green rectangular DDR3L server memory module with gold contacts and black chips

A-Tech

A-Tech 4GB DDR3L 1333 ECC RDIMM 1Rx4 1.35V Server Memory

SKU CH-MGPP-HM9X5

4GB DDR3L 1333 ECC registered DIMM with 1Rx4 organisation and 1.35V low-voltage operation

  • Capacity4GB
  • SpeedDDR3L 1333 (PC3L 10600)
  • CAS LatencyCL9
  • Voltage1.35V
  • ECCYes
  • Buffered/RegisteredRegistered
  • ECC protection guards data integrity with registered DDR3L design
  • Low 1.35V operation cuts power draw and heat in servers
  • 1333 MHz CL9 timing delivers responsive throughput for workloads
  • 1Rx4 rank layout fits dense memory configurations
  • 240-pin DIMM form factor matches standard server slots

4GB DDR3L 1333 ECC RDIMM 1Rx4

This 4GB DDR3L 1333 (PC3L-10600) ECC registered DIMM is built for servers and workstations that require error-correcting memory. It runs at 1.35V with CL9 latency and uses a 1Rx4 Micron chipset. The 240-pin module replaces Micron MT18KSF51272PZ-1G4M1FE, MT18KSF51272PZ-1G4M1HE and MT18KDF51272PZ-1G4M1FF.

Suited for DDR3L registered ECC systems

This module fits systems that take DDR3L 1333 registered ECC DIMMs with a 1Rx4 organisation. It is not for platforms that need unbuffered UDIMMs, non-ECC memory, 1.5V DDR3, higher capacities, faster speeds or a different rank configuration.

DDR3L 1333 registered ECC with 1Rx4 organisation

The single specification that decides compatibility is the combination of DDR3L 1333 speed, registered ECC signalling and 1Rx4 rank layout. Your motherboard must support all three attributes together; otherwise the module will not function.

Pluspunten

  • ECC protection guards data integrity with registered DDR3L design
  • Low 1.35V operation cuts power draw and heat in servers
  • 1333 MHz CL9 timing delivers responsive throughput for workloads
  • 1Rx4 rank layout fits dense memory configurations
  • 240-pin DIMM form factor matches standard server slots

Specificaties

BrandA-Tech
SeriesCompatible Replacement for Micron
ModelMT18KSF51272PZ-1G4M1FE, MT18KSF51272PZ-1G4M1HE, MT18KDF51272PZ-1G4M1FF
Capacity4GB
SpeedDDR3L 1333 (PC3L 10600)
CAS LatencyCL9
Voltage1.35V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx4
ChipsetMicron Chipset
FeaturesMT18KSF51272PZ-1G4M1FE, MT18KSF51272PZ-1G4M1HE, MT18KDF51272PZ-1G4M1FF

Vragen over dit artikel

Does the 1.35 V DDR3L module run cooler than standard 1.5 V DDR3 during continuous server loads?

The 1.35 V DDR3L voltage reduces power draw and heat output compared with 1.5 V DDR3, helping the 4 GB registered ECC module stay cooler during all-day operation.

My motherboard has 240-pin DDR3 DIMM slots — will this 262-pin module fit?

The module uses the standard 240-pin DDR3 DIMM form factor; the 262-pin reference in the supplier data is a typo, so it fits regular DDR3 server boards.

Can I mix this 1Rx4 registered ECC stick with older 2Rx8 registered ECC modules in the same channel?

Mixing 1Rx4 and 2Rx8 registered ECC DIMMs is generally supported if the platform qualifies both ranks, but you should verify the server's memory population rules before installing.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.