Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Green 240-pin DDR3L UDIMM with black chips, 1Rx8 layout

A-Tech

A-Tech 4GB DDR3L 1333 ECC UDIMM 1Rx8 1.35V Server RAM

SKU CH-ECBJ-843Y9

4GB DDR3L 1333 ECC UDIMM module with 1Rx8 layout runs at 1.35V for low-power server upgrades

  • Capacity4GB
  • SpeedDDR3L 1333 (PC3L 10600)
  • CAS LatencyCL9
  • Voltage1.35V
  • ECCYes
  • Buffered/RegisteredUnbuffered
  • ECC protection guards data integrity in servers
  • 35V DDR3L cuts power draw and heat
  • 1333MHz CL9 speed handles heavy workloads
  • 240-pin UDIMM fits standard server slots
  • Tested Micron-compatible replacement ensures reliable operation

Capacity and form factor

This A-Tech module delivers 4 GB of DDR3L memory in a 240-pin UDIMM package. It is built for servers and workstations that require ECC protection and low-voltage operation at 1.35 V.

Who it suits and who it does not

The stick fits systems that accept DDR3L 1333 unbuffered ECC DIMMs with a 1Rx8 organisation. Buyers whose platforms demand registered memory, higher densities, or a different DDR generation should look elsewhere.

Deciding specification

The module runs at DDR3L 1333 (PC3L-10600) with CL9 latency and 1.35 V; matching those three values to the motherboard's supported memory list is the single check that confirms compatibility.

Pluspunten

  • ECC protection guards data integrity in servers
  • 35V DDR3L cuts power draw and heat
  • 1333MHz CL9 speed handles heavy workloads
  • 240-pin UDIMM fits standard server slots
  • Tested Micron-compatible replacement ensures reliable operation

Specificaties

BrandA-Tech
SeriesCompatible Replacement for Micron
ModelMT9KDF51272AZ-1G4E1
Capacity4GB
SpeedDDR3L 1333 (PC3L 10600)
CAS LatencyCL9
Voltage1.35V
ECCYes
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMicron Chipset
FeaturesMT9KDF51272AZ-1G4E1

Vragen over dit artikel

How much heat does the 1.35V DDR3L module add when running continuously in a server?

The 1.35V DDR3L voltage reduces power draw compared to standard 1.5V DDR3, so the 4GB stick generates less heat during all-day workloads.

Does my motherboard need a 240-pin DDR3 slot that supports ECC unbuffered memory?

Yes — this is a 240-pin DDR3L UDIMM with ECC, so the board must accept unbuffered ECC modules at 1.35V.

Can I mix this 1Rx8 PC3L-10600 stick with older 1.5V DDR3 DIMMs?

Mixing 1.35V DDR3L with 1.5V DDR3 is not recommended; the system will default to the higher voltage and may destabilise the low-voltage module.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.