Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Green 240-pin DDR3L server DIMM with silver heat spreader and black chips

A-Tech

A-Tech 4GB DDR3L 1333MHz ECC RDIMM 1Rx4 1.35V Server RAM

SKU CH-K0V3-37BAC

A 4 GB DDR3L ECC registered DIMM running at 1333 MHz with 1.35 V low voltage for server upgrades

  • Capacity4GB
  • SpeedDDR3L 1333 (PC3L 10600)
  • CAS LatencyCL9
  • Voltage1.35V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 4GB capacity adds memory headroom for demanding server workloads
  • DDR3L 1333MHz speed delivers reliable data throughput for registered DIMM systems
  • ECC registered design detects and corrects single-bit errors to protect data integrity
  • 35V low-voltage operation reduces power draw and heat in dense configurations
  • Compatible replacement for Hynix HMT351V7CFR4A-H9 and HMT351V7BFR4A-H9 modules

A-Tech 4GB DDR3L 1333MHz ECC RDIMM

This is a new A-Tech 4GB DDR3L 1333MHz ECC Registered DIMM built as a compatible replacement for Hynix HMT351V7CFR4A-H9 and HMT351V7BFR4A-H9 modules. It operates at 1.35V with CL9 latency and a 1Rx4 rank configuration using major brand chipsets. The 240-pin DDR3 DIMM form factor fits server and workstation boards that accept registered ECC memory.

Suits servers needing low-voltage registered ECC

Systems that require registered ECC DDR3L memory at 1333MHz with a 1.35V operating voltage can use this module to add 4GB per slot. It is not for platforms that only accept unbuffered UDIMMs or modules with a different rank organisation. Buyers whose hardware demands a higher per-module capacity or a different DDR generation must select a different part.

Registered ECC with 1Rx4 organisation

The single specification that decides fit is the registered ECC design combined with a 1Rx4 rank layout on a 240-pin DDR3L interface. Only motherboards qualified for registered ECC DDR3L at this speed and rank will post correctly with this module installed.

Pluspunten

  • 4GB capacity adds memory headroom for demanding server workloads
  • DDR3L 1333MHz speed delivers reliable data throughput for registered DIMM systems
  • ECC registered design detects and corrects single-bit errors to protect data integrity
  • 35V low-voltage operation reduces power draw and heat in dense configurations
  • Compatible replacement for Hynix HMT351V7CFR4A-H9 and HMT351V7BFR4A-H9 modules

Specificaties

BrandA-Tech
SeriesCompatible Replacement for Hynix
ModelHMT351V7CFR4A-H9, HMT351V7BFR4A-H9
Capacity4GB
SpeedDDR3L 1333 (PC3L 10600)
CAS LatencyCL9
Voltage1.35V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx4
ChipsetMajor Brand Chipset
FeaturesHMT351V7CFR4A-H9, HMT351V7BFR4A-H9

Vragen over dit artikel

Should I pick the 4GB DDR3L 1333MHz ECC RDIMM or a different capacity for my server?

This listing is a single 4GB module (1Rx4) running at DDR3L 1333MHz with CL9 latency; choose it when your system requires a registered ECC DIMM at 1.35V and you need exactly 4GB per slot.

What does the DDR3L 1333MHz (PC3L-10600) rating mean once the module is installed?

The module operates at 1333MT/s with CL9 timing at 1.35V, delivering registered ECC error correction for stable server workloads within the DDR3L standard.

Does the 240-pin DDR3L RDIMM interface limit the speed or voltage in practice?

The 240-pin DDR3L RDIMM form factor locks operation to 1.35V and the DDR3L 1333MHz (PC3L-10600) data rate; it will not run at higher DDR3 voltages or speeds.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.