Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Green 240-pin DDR3L UDIMM with black memory chips

A-Tech

A-Tech 4GB DDR3L 1600 ECC UDIMM 2Rx8 1.35V Server RAM

SKU CH-MCFM-PJABA

4GB DDR3L 1600 ECC unbuffered DIMM with 2Rx8 rank and 1.35V low voltage for server upgrades

  • Capacity4GB
  • SpeedDDR3L 1600 (PC3L 12800)
  • CAS LatencyCL11
  • Voltage1.35V
  • ECCYes
  • Buffered/RegisteredUnbuffered
  • ECC protection prevents data corruption in server workloads
  • Low 1.35V DDR3L operation reduces power draw
  • CL11 latency at 1600MHz delivers responsive performance
  • 2Rx8 dual-rank organisation increases memory density
  • 240-pin UDIMM form factor fits compatible server boards

A-Tech 4GB DDR3L 1600 ECC UDIMM

This A-Tech module is a 4GB DDR3L 1600 ECC UDIMM built for server and workstation systems. It runs at 1.35V low voltage with a CL11 latency and uses a 2Rx8 unbuffered design. Major-brand chips are fitted to each 240-pin DIMM.

Suits ECC-capable DDR3L platforms only

This memory fits systems that accept DDR3L 1600 ECC unbuffered DIMMs at 1.35V. It will not work in platforms that require registered or load-reduced modules, nor in boards limited to standard 1.5V DDR3 or non-ECC consumer memory.

2Rx8 ECC unbuffered organisation

The single 4GB stick is organised as 2Rx8 with on-die error correction and no register. Verify that your motherboard or server chassis supports this exact rank, voltage and ECC type before ordering.

Pluspunten

  • ECC protection prevents data corruption in server workloads
  • Low 1.35V DDR3L operation reduces power draw
  • CL11 latency at 1600MHz delivers responsive performance
  • 2Rx8 dual-rank organisation increases memory density
  • 240-pin UDIMM form factor fits compatible server boards

Specificaties

BrandA-Tech
Capacity4GB
SpeedDDR3L 1600 (PC3L 12800)
CAS LatencyCL11
Voltage1.35V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Vragen over dit artikel

Does my motherboard need a 240-pin DDR3L slot to accept this module?

Yes, this is a 240-pin DDR3L UDIMM, so the board must provide a DDR3L DIMM socket that runs at 1.35 V.

Can I mix this CL11 1600 MHz stick with existing CL9 DDR3L modules?

The system will downclock all modules to the slowest timing, so the CL11 stick will run at CL9 speed if the BIOS allows it.

How do I confirm the ECC function is active after installation?

Enter the BIOS or use an OS tool such as dmidecode and verify that the memory is reported as ECC unbuffered with the correct 4 GB capacity.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.