Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen

A-Tech

A-Tech 4GB DDR4 2400 ECC UDIMM CL17 1Rx8 server RAM

SKU CH-HAVS-66ZQM

4 GB DDR4 2400 ECC unbuffered UDIMM with CL17 latency and 1.2 V operation

  • Capacity4GB
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredUnbuffered
  • ECC protection prevents data corruption with built-in error correction
  • DDR4 2400 MHz speed handles demanding server workloads efficiently
  • 2 V standard voltage reduces power consumption and heat
  • 288-pin UDIMM form factor fits compatible server motherboards
  • 1Rx8 single-rank design optimises memory controller performance

4GB DDR4 2400 ECC UDIMM Server Memory

This A-Tech module delivers 4GB of DDR4 2400 ECC unbuffered memory for server and workstation systems. It operates at CL17 latency with standard 1.20V voltage and uses a 1Rx8 rank configuration on a 288-pin DIMM. The module serves as a compatible replacement for the Kingston KVR24E17S8/4 part number.

Suits ECC UDIMM Slots Only — Not Registered Systems

This memory fits motherboards that accept unbuffered ECC UDIMM modules. It will not work in platforms requiring registered or load-reduced DIMMs. Buyers needing larger single-module capacities or higher frequency ratings should verify their board specifications before purchasing.

DDR4 2400 Speed Decides Compatibility

The module runs at DDR4 2400 (PC4-19200) with CL17 timing. Your system must support this exact speed grade and unbuffered ECC operation for the RAM to function correctly.

Pluspunten

  • ECC protection prevents data corruption with built-in error correction
  • DDR4 2400 MHz speed handles demanding server workloads efficiently
  • 2 V standard voltage reduces power consumption and heat
  • 288-pin UDIMM form factor fits compatible server motherboards
  • 1Rx8 single-rank design optimises memory controller performance

Specificaties

BrandA-Tech
SeriesCompatible Replacement for Kingston
ModelKVR24E17S8/4
Capacity4GB
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Voltage1.20V
ECCYes
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor Brand Chipset
FeaturesKVR24E17S8/4

Vragen over dit artikel

My motherboard has four DDR4 DIMM slots — will this 288-pin UDIMM fit?

Yes, the module uses the standard 288-pin DDR4 UDIMM form factor and will install in any compatible DDR4 DIMM slot.

Can I mix this ECC unbuffered stick with the non-ECC DDR4 2400 modules already in my workstation?

Mixing ECC and non-ECC memory is not recommended; the system will typically disable ECC and may default to the lowest common speed or fail to boot.

After installing the RAM, how do I confirm the module is running at DDR4 2400 with ECC active?

Enter the BIOS/UEFI or use a tool like CPU-Z on Linux/Windows — verify the speed reads 2400 MT/s, CL17 timings, and ECC status shows enabled.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.