Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen

A-Tech

A-Tech 8GB DDR3 1066MHz ECC RDIMM 4Rx8 Server Memory for Micron MT36JSZF1G72PDZ-1G1D1 MT36JSF1G72PDXZ-1G1D1

SKU CH-F0Y6-97NVS

8GB DDR3 1066MHz ECC registered server DIMM with 4Rx8 organisation and 1.5V operation

  • Capacity8GB
  • SpeedDDR3 1066 (PC3 8500)
  • CAS LatencyCL3
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered
  • ECC protection safeguards data integrity in server workloads
  • Registered design stabilises signal timing for dense configurations
  • 1066 MHz DDR3 speed matches PC3-8500 system requirements
  • 5 V standard voltage ensures broad platform compatibility
  • 4Rx8 organisation maximises 8 GB capacity per module

What this module is and who needs it

This A-Tech 8 GB DDR3 registered DIMM replaces Micron MT36JSZF1G72PDZ-1G1D1 and MT36JSF1G72PDXZ-1G1D1 modules in server and workstation systems. It delivers ECC error correction and registered signalling for platforms that require those features. Buyers who need unbuffered desktop memory or a different DDR generation cannot use this module.

The specification that decides fit

The module runs at DDR3 1066 (PC3-8500) with a CL3 latency, 1.50 V operation and a 4Rx8 organisation on a 240-pin DIMM. Your system must support registered ECC DDR3 at this speed, voltage and rank configuration; otherwise the module will not function.

Installation and common pitfalls

Insert the 240-pin DIMM into a compatible registered DDR3 slot until the retention clips lock. The most frequent issues are mixing registered and unbuffered modules, exceeding the platform's maximum rank count per channel, or installing in a board that only accepts unbuffered memory.

Pluspunten

  • ECC protection safeguards data integrity in server workloads
  • Registered design stabilises signal timing for dense configurations
  • 1066 MHz DDR3 speed matches PC3-8500 system requirements
  • 5 V standard voltage ensures broad platform compatibility
  • 4Rx8 organisation maximises 8 GB capacity per module

Specificaties

BrandA-Tech
SeriesCompatible Replacement for Micron
ModelMT36JSZF1G72PDZ-1G1D1, MT36JSF1G72PDXZ-1G1D1
Capacity8GB
SpeedDDR3 1066 (PC3 8500)
CAS LatencyCL3
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank4Rx8
ChipsetMicron Chipset
FeaturesMT36JSZF1G72PDZ-1G1D1, MT36JSF1G72PDXZ-1G1D1

Vragen over dit artikel

How does DDR3 1066 (PC3-8500) perform once installed in a server?

The module runs at 1066 MHz with CL3 latency, delivering the rated PC3-8500 data rate; ECC and registered buffering add error correction and signal integrity for stable operation under sustained workloads

What does the PC3-8500 designation limit in practice?

PC3-8500 caps the maximum transfer rate at the DDR3 1066 standard, so the DIMM cannot exceed that bandwidth even if the platform supports faster DDR3 speeds

What physical slot and clearance does this 240-pin RDIMM require?

It fits a standard DDR3 240-pin DIMM socket; the registered design adds a buffer chip, so verify the motherboard supports registered modules and has enough height clearance for the 8GB stick

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.