Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Green 240-pin DDR3 DIMM with silver heatsink and black chips

A-Tech

A-Tech 8GB DDR3 1333MHz PC3-10600 ECC RDIMM 2Rx4 for Micron MT36JSF1G72PZ-1G4 Server Memory

SKU CH-P214-VX6F4

An 8 GB DDR3-1333 ECC registered DIMM with 2Rx4 organisation for Micron-compatible servers

  • Capacity8GB
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 8GB capacity expands server memory for heavier workloads
  • DDR3 1333MHz PC3-10600 speed matches Micron MT36JSF1G72PZ-1G4 spec
  • ECC RDIMM registered design protects data integrity in critical tasks
  • 2Rx4 dual-rank layout fits 240-pin DDR3 DIMM slots
  • 50V standard DDR3 voltage ensures broad platform compatibility

Compatible Server Upgrade

This 8GB DDR3 module replaces Micron part numbers MT36JSF1G72PZ-1G4, MT36JSF1G72PZ-1G4K1, MT36JSF1G72PZ-1G4M1, MT36JSZF1G72PZ-1G4 and MT36JSZF1G72PZ-1G4D1. It is built for server and workstation systems that require registered ECC memory. Buyers who need unbuffered DIMMs or a different DDR generation cannot use this part.

Registered ECC Build

The module uses a 240-pin DIMM form factor with a registered design that places a register between the DRAM and the memory controller. ECC circuitry detects and corrects single-bit errors to protect data integrity in critical workloads. Major-brand chips and a 1.5V operating voltage match the original Micron specifications. Systems that lack registered DIMM support will not accept this memory.

DDR3 1333MHz CL9 Spec

The memory runs at 1333MHz (PC3-10600) with a CAS latency of CL9. This speed and latency combination determines whether the module matches the server's qualified vendor list. Verify your platform's supported DDR3 1333MHz registered ECC configuration before ordering.

Pluspunten

  • 8GB capacity expands server memory for heavier workloads
  • DDR3 1333MHz PC3-10600 speed matches Micron MT36JSF1G72PZ-1G4 spec
  • ECC RDIMM registered design protects data integrity in critical tasks
  • 2Rx4 dual-rank layout fits 240-pin DDR3 DIMM slots
  • 50V standard DDR3 voltage ensures broad platform compatibility

Specificaties

BrandA-Tech
Capacity8GB
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Vragen over dit artikel

What bandwidth does the DDR3 1333 PC3-10600 interface deliver in practice?

The DDR3 1333 PC3-10600 interface delivers up to 10600 MB/s bandwidth in practice.

What physical slot does the 240-pin DIMM require for installation?

The 240-pin DIMM requires a standard DDR3 DIMM slot on the server or workstation motherboard.

How is the registered ECC module installed, and what step is often missed?

Align the notch on the 240-pin DIMM with the slot key, press firmly until both retention clips click, and ensure the registered ECC module is seated fully to avoid detection errors.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.