Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen

A-Tech

A-Tech 8GB DDR3 1600 ECC RDIMM 1Rx4 server RAM 733020-581

SKU CH-R9J3-N11WK

8GB DDR3 1600 ECC registered DIMM with CL11 latency and 1.5V operation for HP 733020-581 servers

  • Capacity8GB
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 8GB capacity expands server multitasking headroom
  • DDR3 1600 MHz speed accelerates data throughput
  • ECC registered design protects critical workload integrity
  • 5V standard voltage ensures broad platform compatibility
  • 240-pin DIMM form factor fits DDR3 server slots

Server Memory Upgrade

This 8GB DDR3 1600 ECC RDIMM module is built for HP server and workstation platforms that require registered memory with error correction. It suits administrators expanding capacity in compatible systems using the 733020-581 part number.

Registered ECC Design

The registered buffer and ECC function reduce electrical load on the memory controller and correct single-bit errors, which helps maintain data integrity under sustained workloads. The 1Rx4 organisation and 1.5V operation match the original specification for supported HP platforms.

Straightforward Installation

The 240-pin DIMM fits standard DDR3 server slots; alignment is keyed so the module seats in one orientation. Issues usually arise when mixing registered and unbuffered DIMMs or when the system BIOS does not recognise the 1Rx4 density, so verify the qualified vendor list before adding this stick.

Pluspunten

  • 8GB capacity expands server multitasking headroom
  • DDR3 1600 MHz speed accelerates data throughput
  • ECC registered design protects critical workload integrity
  • 5V standard voltage ensures broad platform compatibility
  • 240-pin DIMM form factor fits DDR3 server slots

Specificaties

BrandA-Tech
SeriesCompatible Replacement for HP
Model733020-581
Capacity8GB
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx4
ChipsetMajor Brand Chipset
Features733020-581

Vragen over dit artikel

Will the registered ECC RDIMM require any firmware updates or periodic maintenance after installation?

No firmware updates or scheduled maintenance are needed; the module is a validated replacement for HP 733020-581 and runs at standard 1.5 V DDR3 voltage.

What thermal or power limit appears first when this 8 GB DDR3-1600 module runs continuously in a server?

The 1.50 V DDR3 standard voltage and CL11 timing define the power envelope; sustained loads stay within the JEDEC DDR3 spec for registered DIMMs.

How much heat and fan noise does this single-rank 1Rx4 RDIMM add when the system runs all day?

As a standard-voltage DDR3 registered DIMM it draws nominal power, so additional heat and acoustic impact are minimal in a properly cooled chassis.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.