Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Green 240-pin DDR3 DIMM with black chips and silver label

A-Tech

A-Tech 8GB DDR3 1600MHz ECC RDIMM 2Rx4 CL11 1.5V Server Memory

SKU CH-AKRN-1NJ3N

8GB DDR3 1600MHz ECC registered DIMM with CL11 latency and 1.5V operation for server upgrades

  • Capacity8GB
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered
  • ECC protection prevents data errors with registered DDR3 design
  • 1600 MHz DDR3 speed handles demanding server workloads
  • 2Rx4 organisation increases memory density for 8 GB capacity
  • 5 V standard voltage ensures broad platform compatibility
  • 240-pin DIMM form factor fits standard server memory slots

Server DDR3 module

This registered ECC DIMM delivers 8 GB of DDR3 1600 memory for servers and workstations that require error-correcting registered modules. It operates at the standard 1.5 V DDR3 voltage and uses a 240-pin form factor. The module is built as a direct replacement for the Kingston KVR16R11D4/8 part number.

8 GB capacity and headroom

The single 8 GB stick adds a useful increment to multi-socket platforms that populate many slots, letting the system handle larger datasets and more concurrent virtual machines. Headroom ends when the platform's maximum supported memory per channel or total socket limit is reached, which varies by motherboard and processor.

Registered ECC with 2Rx4 organisation

The 2Rx4 rank configuration and registered buffer reduce electrical load on the memory controller, a requirement for stability in multi-DIMM server boards. Systems that accept only unbuffered non-ECC UDIMMs cannot use this module.

Pluspunten

  • ECC protection prevents data errors with registered DDR3 design
  • 1600 MHz DDR3 speed handles demanding server workloads
  • 2Rx4 organisation increases memory density for 8 GB capacity
  • 5 V standard voltage ensures broad platform compatibility
  • 240-pin DIMM form factor fits standard server memory slots

Specificaties

BrandA-Tech
SeriesCompatible Replacement for Kingston
ModelKVR16R11D4/8
Capacity8GB
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor Brand Chipset
FeaturesKVR16R11D4/8

Vragen over dit artikel

Will this DDR3 1600MHz ECC RDIMM run at its rated speed alongside older DDR3 modules I already have?

The module runs at DDR3 1600 (PC3-12800). When mixed with slower DDR3 modules the system typically clocks all memory to the lowest common speed, so this stick would operate at the slower module's frequency.

How can I confirm the 8GB ECC RDIMM is recognised and running with error correction active after installation?

Enter the server BIOS or UEFI and check the memory information screen; it should show 8GB detected, ECC enabled, and a registered DIMM configuration. Operating system tools such as dmidecode or CPU-Z will also report ECC and registered status.

What is included in the box and do I need to buy anything else to install this 240-pin DDR3 RDIMM?

The box contains one 8GB DDR3 1600MHz ECC RDIMM (2Rx4, 1.5V). No additional components are required; the module installs directly into a compatible 240-pin registered DIMM slot.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.