Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Green 240-pin DDR3 DIMM with black chips and silver heat spreader

A-Tech

A-Tech 8GB DDR3 1866 ECC RDIMM 2Rx8 CL13 1.5V Server Memory

SKU CH-QH63-V3A9T

Adds 8 GB of DDR3 1866 ECC registered memory with CL13 latency for server workloads

  • Capacity8GB
  • SpeedDDR3 1866 (PC3 14900)
  • CAS LatencyCL13
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered
  • ECC protection guards data integrity with registered DDR3 design
  • 1866 MHz speed and CL13 latency deliver responsive server performance
  • 5 V standard voltage ensures broad platform compatibility
  • 240-pin DIMM form factor fits registered DDR3 server slots
  • 2Rx8 organisation provides 8 GB capacity per module

8GB DDR3 1866 ECC RDIMM for Servers

This 8GB registered DIMM runs at DDR3 1866 speed with CL13 latency and 1.5V operation. It is built for server and workstation systems that require error-correcting memory. The 2Rx8 organisation and 240-pin form factor match the Micron MT18JDF1G72PDZ-1G9 and related part numbers. Buyers needing unbuffered UDIMM modules or higher-density single-rank sticks cannot use this part.

Registered ECC design with major-brand chips

The registered buffer reduces electrical load on the memory controller, allowing larger memory populations in multi-socket platforms. On-board ECC detects and corrects single-bit errors to protect data integrity in critical workloads. Major-brand DRAM chips are used throughout, and every module undergoes quality-assurance testing before shipment. Systems that do not support registered or ECC memory will not accept this module.

DDR3 1866 (PC3-14900) speed grade

The module operates at 1866 MT/s with a CAS latency of 13 cycles at the standard 1.5V DDR3 voltage. This speed rating determines whether the memory matches the platform's qualified vendor list and maximum supported frequency. Installing modules rated for a different speed or voltage can prevent the system from posting or force it to run at a lower rate.

Pluspunten

  • ECC protection guards data integrity with registered DDR3 design
  • 1866 MHz speed and CL13 latency deliver responsive server performance
  • 5 V standard voltage ensures broad platform compatibility
  • 240-pin DIMM form factor fits registered DDR3 server slots
  • 2Rx8 organisation provides 8 GB capacity per module

Specificaties

BrandA-Tech
Capacity8GB
SpeedDDR3 1866 (PC3 14900)
CAS LatencyCL13
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Vragen over dit artikel

Will the 2Rx8 registered ECC module need any firmware updates or chip replacements during its service life?

No firmware updates or chip replacements are required; the module uses major-brand chips tested for dependable server operation.

What is the first limit reached when the DIMM runs continuously at DDR3 1866 CL13?

The CAS latency of 13 cycles at 1866 MHz sets the timing boundary that appears first under sustained load.

How much heat and power does the 1.5 V registered DIMM produce during all-day operation?

It operates at the standard DDR3 1.5 V, so power draw and heat stay within normal registered-DIMM limits for continuous use.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.