Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Green printed circuit board with black memory chips on both sides and gold edge connector

A-Tech

A-Tech 8GB DDR4 2400MHz CL17 1.2V DIMM 288-Pin Desktop RAM

SKU CH-JENZ-00N6C

An 8 GB DDR4 desktop module running at 2400 MHz with CL17 latency and 1.2 V operation in a 288-pin unbuffered DIMM

  • Capacity8GB
  • SpeedDDR4 2400 (PC4 19200)
  • Tested Frequency2400
  • CAS LatencyCL17
  • Voltage1.20V
  • ECCNo
  • 8GB DDR4 capacity handles heavier multitasking workloads
  • 2400 MHz tested frequency speeds up data transfer
  • CL17 CAS latency keeps response times tight
  • 20 V DDR4 standard voltage reduces power draw
  • 288-pin DIMM fits standard desktop motherboard slots

Capacity and Interface

This A-Tech module delivers 8GB of DDR4 desktop memory at 2400MHz with CL17 latency and standard 1.20V operation. The 288-pin unbuffered DIMM uses major-brand chips and is tested to PC4-19200 specification.

Use-Case Fit

The stick suits owners of desktops that require DDR4 2400 non-ECC UDIMM upgrades and want a direct equivalent to the Kingston KVR24N17D8/8 part. Systems needing ECC, registered modules, or a different DDR generation should select another product.

Deciding Specification

The single specification that determines fit is the DDR4 2400MHz CL17 1.20V 288-pin unbuffered DIMM standard; if your motherboard calls for a different speed, latency, voltage or pin count, this module will not be compatible.

Pluspunten

  • 8GB DDR4 capacity handles heavier multitasking workloads
  • 2400 MHz tested frequency speeds up data transfer
  • CL17 CAS latency keeps response times tight
  • 20 V DDR4 standard voltage reduces power draw
  • 288-pin DIMM fits standard desktop motherboard slots

Specificaties

BrandA-Tech
Capacity8GB
SpeedDDR4 2400 (PC4 19200)
Tested Frequency2400
CAS LatencyCL17
Voltage1.20V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor Brand Chips
FeaturesMajor Brand Chipset
Recommend UseAMD & Intel Compatible

Vragen over dit artikel

Will this DDR4 2400 CL17 1.2V module run alongside my existing DDR4 sticks?

The module operates at DDR4 2400 with CL17 timing and 1.2V. The motherboard will run all installed memory at the speed of the slowest stick, so mixing speeds is possible but overall performance drops to the lowest common rate.

How can I verify the 8GB DDR4 2400 CL17 module is detected at the correct speed after installation?

Open Task Manager or BIOS and confirm the installed capacity shows 8GB, the type reads DDR4, the speed reads 2400 MT/s, and the reported voltage is 1.2V.

Does the 288-pin DIMM come alone or with extra accessories, and what else might I need?

The box contains the single 8GB 288-pin UDIMM only. No cables, brackets, or tools are included; ensure your desktop has a free DDR4 DIMM slot before purchase.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.