Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Green rectangular circuit board with black memory chips and gold edge connectors

A-Tech

A-Tech 8GB DDR4 2400MHz ECC RDIMM 1Rx8 Server Memory

SKU CH-FBPG-WJZ4V

8GB DDR4 2400MHz ECC registered DIMM for server and workstation memory upgrades

  • Capacity8GB
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredRegistered
  • ECC protection guards data integrity with registered DDR4 2400 operation
  • 2 V standard voltage reduces power draw on server platforms
  • Single-rank 1Rx8 layout fits dense memory configurations
  • 288-pin DIMM form factor installs in DDR4 RDIMM slots
  • Tested replacement for Micron MTA9ASF1G72PZ-2G3B1IG module

Target System & Purpose

This 8 GB DDR4 ECC RDIMM is built for servers and workstations that require registered memory with error correction. It replaces the Micron MTA9ASF1G72PZ-2G3B1IG module in compatible platforms.

Decisive Specification

The module is a single-rank 1Rx8 registered DIMM running at DDR4 2400 (PC4-19200) with CL17 latency and 1.20 V operation. Systems that only accept unbuffered UDIMMs or a different rank configuration will not support this part.

Thermals, Noise & Power

As a passive component, the DIMM adds no fan noise and draws minimal power at the standard 1.2 V DDR4 voltage. Normal operating temperatures stay within JEDEC limits when installed in a chassis with adequate airflow across the memory slots.

Pluspunten

  • ECC protection guards data integrity with registered DDR4 2400 operation
  • 2 V standard voltage reduces power draw on server platforms
  • Single-rank 1Rx8 layout fits dense memory configurations
  • 288-pin DIMM form factor installs in DDR4 RDIMM slots
  • Tested replacement for Micron MTA9ASF1G72PZ-2G3B1IG module

Specificaties

BrandA-Tech
SeriesCompatible Replacement for Micron
ModelMTA9ASF1G72PZ-2G3B1IG
Capacity8GB
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMicron Chipset
FeaturesMTA9ASF1G72PZ-2G3B1IG

Vragen over dit artikel

What does the 2400MHz speed actually deliver once the module is installed in a server?

The module runs at DDR4 2400 (PC4-19200) with CL17 latency and 1.20V, giving the rated bandwidth and timing the platform negotiates at that speed.

How does the registered ECC interface affect usable capacity and stability?

As an ECC RDIMM with a 1Rx8 organisation, the register buffers address and command signals while ECC corrects single-bit errors, letting the memory controller scale to larger populations without signal degradation.

Will the 288-pin DIMM fit a standard DDR4 server slot?

Yes, it is a 288-pin DDR4 DIMM built to the standard DDR4 form factor, so it seats in any compatible DDR4 RDIMM slot.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.