Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Green rectangular DDR4 server memory module with gold contacts and black chips

A-Tech

A-Tech 8GB DDR4 2666MHz ECC RDIMM 2Rx8 CL19 1.2V Server Memory

SKU CH-3YD0-XP9ZR

An 8 GB DDR4 2666 MHz ECC registered DIMM with CL19 latency and 1.2 V operation for server upgrades

  • Capacity8GB
  • SpeedDDR4 2666 (PC4 21300)
  • CAS LatencyCL19
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredRegistered
  • ECC RDIMM protects data integrity in servers
  • 2666 MHz DDR4 speed handles heavy workloads
  • 2 V operation reduces power draw
  • 288-pin DIMM fits standard server slots
  • CL19 latency balances timing and stability

Server-ready 8 GB DDR4 module

This A-Tech registered DIMM delivers 8 GB of DDR4 2666 MHz memory with ECC error correction. The 2Rx8 organisation and 1.2 V operation suit enterprise servers and workstations that require registered modules. It plugs into standard 288-pin DDR4 slots.

Replaces Hynix HMA41GR7BJR8N-VK

The module is a direct equivalent for the Hynix HMA41GR7BJR8N-VK part number. The upgrade is worthwhile when a system currently runs below the PC4-21300 speed grade or lacks ECC protection for data integrity. CL19 latency matches the original specification.

Fits registered DDR4 platforms

Installation requires a motherboard that supports registered ECC DDR4 DIMMs at 2666 MHz. The single-module design leaves additional slots free for future capacity expansion. Verify the platform's qualified-vendor list before purchase to ensure compatibility.

Pluspunten

  • ECC RDIMM protects data integrity in servers
  • 2666 MHz DDR4 speed handles heavy workloads
  • 2 V operation reduces power draw
  • 288-pin DIMM fits standard server slots
  • CL19 latency balances timing and stability

Specificaties

BrandA-Tech
Capacity8GB
SpeedDDR4 2666 (PC4 21300)
CAS LatencyCL19
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Vragen over dit artikel

Will this 288-pin DDR4 DIMM fit my server motherboard?

The module uses the standard 288-pin DDR4 DIMM form factor, so it fits any server or workstation board that accepts DDR4 registered ECC memory.

What is the correct way to seat this registered ECC module, and what step is often missed?

Align the notch with the slot key, press firmly until both side latches click, then verify the system detects the full 8 GB capacity at 2666 MHz in BIOS.

When should I consider replacing this 8 GB DDR4 2666 module?

Replace it if memory diagnostics report correctable or uncorrectable ECC errors, if the system fails to POST with the module installed, or when upgrading to a higher-capacity configuration.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.