Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Green rectangular server memory module with gold contacts and black chips

A-Tech

A-Tech 8GB DDR4 3200 ECC RDIMM 1Rx8 server RAM

SKU CH-9K72-5EP89

8GB DDR4 3200 ECC registered DIMM with CL22 latency and 1.2V operation for server and workstation upgrades

  • Capacity8GB
  • SpeedDDR4 3200 (PC4 25600)
  • CAS LatencyCL22
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredRegistered
  • ECC protection prevents data corruption in server workloads
  • DDR4 3200 MHz speed handles demanding applications
  • Registered DIMM design stabilises high-density memory configurations
  • 20 V operation reduces power draw and heat
  • 288-pin DDR4 form factor fits standard server slots

8GB DDR4 3200 ECC RDIMM for servers

This 8GB registered DIMM adds ECC-protected memory to compatible server and workstation platforms. The module runs at DDR4 3200 with a CL22 latency and standard 1.20V operation. It is built as a direct replacement for the Hynix HMA81GR7CJR8N-XN part number.

288-pin registered DIMM with major-brand chips

The registered design places a buffer between the memory controller and the DRAM, reducing electrical load on the server motherboard. Major-brand chips are used throughout and every module undergoes quality-assurance testing before shipment. The 288-pin form factor fits standard DDR4 DIMM slots in qualified systems.

Single 1Rx8 rank at CL22

This module is organised as a single 1Rx8 rank, which determines how the memory controller addresses the chips. Buyers needing multiple ranks per channel or lower CAS latency should verify their platform requirements before ordering.

Pluspunten

  • ECC protection prevents data corruption in server workloads
  • DDR4 3200 MHz speed handles demanding applications
  • Registered DIMM design stabilises high-density memory configurations
  • 20 V operation reduces power draw and heat
  • 288-pin DDR4 form factor fits standard server slots

Specificaties

BrandA-Tech
Capacity8GB
SpeedDDR4 3200 (PC4 25600)
CAS LatencyCL22
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Vragen over dit artikel

What DDR4 speed does the 3200MHz PC4-25600 module run at?

The module runs at DDR4 3200MHz (PC4-25600) with a CAS latency of CL22 at the standard 1.20V voltage.

Will this 288-pin RDIMM fit my server board?

It uses the standard DDR4 DIMM 288-pin form factor; your motherboard must support registered ECC RDIMMs and 1Rx8 organisation.

How do I install this registered ECC module correctly?

Power off the system, align the 288-pin key notch with the slot, press firmly until the retention clips click, then verify the full 8GB is recognised in BIOS.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.