Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Rectangular silver mining unit with four front fans and Ethernet port

AFRNDK

AFRNDK Antminer HS3 9TH/s 2079W Handshake ASIC mining hardware

SKU CH-5ZRR-VN04F

Handshake ASIC miner delivering 9 TH/s at 2079 W with four fans and 76 dB noise in a 331 x 234 x 391 mm chassis requiring 220 V input

  • TypeMining Barebone System
  • Crypto AlgorithmHandshake Algorithm
  • Compatible CurrencyHNS
  • Mining HardwareASIC
  • Hashrate9TH/s
  • Power Consumption2079W
  • 9 TH/s Handshake hashrate for HNS mining
  • 2079 W power draw at 220 V input
  • Compact 331 x 234 x 391 mm chassis fits tight racks
  • 76 dB noise level with four built-in fans
  • Wired Ethernet interface for stable pool connectivity

AFRNDK Antminer HS3 Handshake ASIC Miner

The AFRNDK Antminer HS3 is an ASIC mining system built for the Handshake algorithm and HNS currency. It delivers a hashrate of 9TH/s while drawing 2079W. The unit suits operators who run dedicated Handshake mining farms and can provide 220V power.

331x234x391mm chassis with four fans and Ethernet

The barebone frame measures 331 by 234 by 391 millimetres and houses four cooling fans that produce 76dB of noise. An Ethernet port provides the sole network link for pool communication and remote management. The 220V input requirement means the miner must be connected to a compatible supply to avoid damage.

9TH/s Handshake hashrate at 2079W

The decisive specification is the 9TH/s Handshake hashrate paired with 2079W power draw. This ratio determines daily HNS yield and electricity cost, letting a buyer calculate whether the HS3 fits their mining economics.

Pluspunten

  • 9 TH/s Handshake hashrate for HNS mining
  • 2079 W power draw at 220 V input
  • Compact 331 x 234 x 391 mm chassis fits tight racks
  • 76 dB noise level with four built-in fans
  • Wired Ethernet interface for stable pool connectivity

Specificaties

BrandANTMINER
SeriesHS3
ModelHS3
TypeMining Barebone System
Crypto AlgorithmHandshake Algorithm
Compatible CurrencyHNS
Mining HardwareASIC
Hashrate9TH/s
Power Consumption2079W

Vragen over dit artikel

What network interface does the Antminer HS3 use and what speed does it cap at in practice?

The Antminer HS3 connects via Ethernet, so its hashrate of 9TH/s is limited by the wired network link rather than by any wireless standard.

What are the exact dimensions and voltage requirement for mounting the Antminer HS3?

The unit measures 331x234x391mm and requires a 220V supply; using the wrong voltage can damage the miner.

How is the Antminer HS3 installed and what step do people often get wrong?

Connect the included power supply to a 220V circuit, link the Ethernet cable, then power on; the common mistake is plugging into a lower voltage and damaging the hardware.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.