Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Rectangular metal mining unit with four fans and Ethernet port, silver grey finish

AFRNDK

AFRNDK Antminer S19 90T 90TH/s 3250W SHA-256 mining hardware

SKU CH-VNQ2-P6ECC

SHA-256 ASIC miner delivering 90 TH/s at 3250 W with 36 J/TH efficiency, Ethernet connectivity and 76 dB noise

  • TypeMining Barebone System
  • Crypto AlgorithmSHA-256
  • Compatible CurrencyBitcoin (BTC)
  • Mining HardwareASIC
  • Hashrate90TH/S
  • Network ConnectionETHERNET
  • 90 TH/s hashrate for SHA-256 Bitcoin mining
  • 36 J/TH power efficiency at the wall
  • 3250 W power draw at 25 °C ambient
  • 76 dB noise level with four cooling fans
  • 220 V AC input required for safe operation

AFRNDK Antminer S19 90T SHA-256 ASIC Miner

The AFRNDK Antminer S19 90T is a dedicated ASIC mining system built for the SHA-256 algorithm. It delivers a hashrate of 90 TH/s with a power efficiency of 36 J/TH. The unit connects via RJ45 Ethernet and operates at a noise level of 76 dB. It requires a 220 V input voltage to function correctly.

Suitable For High-Density SHA-256 Mining Operations

This miner suits operators running Bitcoin, BCH or BSV workloads who can provide 200–240 V AC power and tolerate 76 dB noise in a 0–40 °C environment. It is not suitable for standard 100 V residential outlets or quiet office settings. Buyers needing lower power draw or different algorithms should look elsewhere.

3250 W Power Draw At 25 °C Determines Infrastructure

The single specification that decides fit is the 3250 W wall power at 25 °C with a ±5 % tolerance. Your electrical circuit, PDU and cooling must sustain this continuous load plus the 47–63 Hz frequency range. If the available supply cannot meet 3250 W reliably, the miner will not operate as specified.

Pluspunten

  • 90 TH/s hashrate for SHA-256 Bitcoin mining
  • 36 J/TH power efficiency at the wall
  • 3250 W power draw at 25 °C ambient
  • 76 dB noise level with four cooling fans
  • 220 V AC input required for safe operation

Specificaties

BrandANTMINER
SeriesS19
ModelS19 90T
TypeMining Barebone System
Crypto AlgorithmSHA-256
Compatible CurrencyBitcoin (BTC)
Mining HardwareASIC
Hashrate90TH/S
Network ConnectionETHERNET
Noise level76dB
Fan4
Power Consumption3250W

Vragen over dit artikel

How often do the four fans need cleaning or replacement on the S19 90T?

The four built-in fans run continuously at 76 dB; plan to clean dust from the intake every few months and replace any fan that develops bearing noise or vibration.

What thermal limit stops the S19 90T from hashing at 90 TH/s under sustained load?

The ASICs are rated for 0–40 °C ambient; if inlet air exceeds 40 °C the firmware throttles hashrate to protect the chips.

What is the steady-state power draw and noise level when the S19 90T runs 24/7?

At 25 °C the unit pulls 3250 ±5 % W from a 200–240 V supply and emits 76 dB from its four fans.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.