Alphacool
Alphacool Eisschicht Light Thermal Pad 7W/mK 120x20x1mm Pink diy cooling
A 7 W/mK thermal pad measuring 120x20x1 mm that conducts heat from chips to coolers and can be trimmed to fit
- FeaturesAlphacool's ultimate solution lets you cool your computer wi
- 7 W/mK thermal conductivity moves heat quickly from chips
- 120×20 mm sheet fits RAM coolers and small components
- 1 mm thickness bridges common gaps between die and heatsink
- Self-adhesive flexible material simplifies installation on uneven surfaces
- Easily trimmed with scissors for custom component fit
Alphacool Eisschicht Light 7W/mK Thermal Pad
The Alphacool Eisschicht Light is a self-adhesive thermal interface pad rated at 7W/mK thermal conductivity. It is designed for DIY builders who need a flexible, easy-to-cut material to bridge gaps between chips and cooler bases on graphics cards, motherboards or memory modules. The pink silicone sheet conforms to uneven surfaces without the mess of liquid paste.
120x20x1mm sheet for RAM and small-die components
This specific sheet measures 120x20x1mm, a size tailored for memory coolers and similar narrow applications. The 7W/mK rating provides sufficient heat transfer for memory ICs, VRM phases and other low-to-moderate heat sources. It will not satisfy high-power dies such as modern GPU cores or desktop CPUs where higher conductivity pads or pastes are required.
Scissors-cut customisation with no extra tools
Each pad ships as a single piece that can be trimmed to exact shapes using ordinary scissors. The material is elastic and self-adhesive on both sides, so it stays in place during installation and tolerates repeated mounting cycles. No additional compounds, applicators or curing time are needed, simplifying the upgrade or repair workflow.
Pluspunten
- 7 W/mK thermal conductivity moves heat quickly from chips
- 120×20 mm sheet fits RAM coolers and small components
- 1 mm thickness bridges common gaps between die and heatsink
- Self-adhesive flexible material simplifies installation on uneven surfaces
- Easily trimmed with scissors for custom component fit
Specificaties
| Brand | Alphacool |
|---|---|
| Model | 1013988 |
| Part Number | 1013988 |
| Features | Alphacool's ultimate solution lets you cool your computer with a sheet of ice. Not an ice sheet in the conventional sense, made of frozen water, but a sheet that brings every chip down to freezing. The properties of these new thermal pads speak for themselves. |
Vragen over dit artikel
Will the 1mm thick pad sit flat on my existing RAM cooler without leaving air gaps?
The pad is self-adhesive, elastic and flexible so it conforms to the cooler surface and fills gaps when applied.
How can I verify the 7W/mK pad is transferring heat properly once installed?
Monitor component temperatures under load; they should drop to levels typical for a 7W/mK interface material.
Does the 120x20mm sheet come pre-cut for RAM modules or must I trim it myself?
The 120x20mm size suits RAM coolers and can be cut with scissors to fit any module layout.
Ook in deze afdeling
Klanten vergeleken ook
Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
US$ 0,82
0.00001041BTC
Op voorraad