Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Black 90-degree rotary compression fitting with G1/4 thread for 16mm hard tube

Alphacool

Alphacool Eiszapfen 16mm 90° Rotary Compression Fitting G1/4 Black

SKU CH-TJF0-59ZVD

A 90° rotary compression fitting with G1/4 thread for 16mm hard tubes, finished in durable matte black

  • TypeFittings
  • High-flow design for efficient liquid circulation
  • 90° rotary elbow simplifies tight tubing runs
  • G1/4 thread fits 95% of water-cooling parts
  • 16 mm bore matches standard hard-tube size
  • Durable bonded coating resists chipping and peeling

Premium Hard-Tube Fitting

The Alphacool Eiszapfen 16mm 90° rotary compression fitting joins 16mm acrylic or brass tubes to any component with a G1/4 thread. Its high-flow design suits custom-loop builders who want a clean, right-angled turn without extra tubing length. The deep matte black finish matches modern aesthetics.

Coated Brass Construction

A special surface treatment bonds the black coating to the metal, preventing chipping or peeling during repeated assembly. Slanted corners on the union nut press the O-ring firmly against the tube for a secure seal that survives transport vibration. The rotatable threaded side lets you orient the 90° bend precisely.

G1/4 Thread Standard

The G1/4 thread fits 95% of water-blocks, radiators, reservoirs and pumps on the market. The fitting only accepts 16mm outer-diameter hard tubes; it cannot be used with soft tubing or other diameters. The fixed 90° angle means the bend radius cannot be adjusted after installation.

Pluspunten

  • High-flow design for efficient liquid circulation
  • 90° rotary elbow simplifies tight tubing runs
  • G1/4 thread fits 95% of water-cooling parts
  • 16 mm bore matches standard hard-tube size
  • Durable bonded coating resists chipping and peeling

Specificaties

TypeFittings

Vragen over dit artikel

What G1/4 thread standard does this fitting use and what share of components does it fit?

The fitting uses a G1/4 thread and is compatible with 95% of components.

What tube outer diameter and material does the 16 mm compression end accept?

It accepts 16 mm outer-diameter acrylic or brass hard tubes.

How is the rotary 90° fitting installed and which step is often missed?

Screw the G1/4 side into the component, orient the 90° bend, then tighten the union nut until the slanted corners press the O-ring firmly against the tube.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.