Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Compact metal-encased HV DC-DC module with standardized connectors

Analog Technologies, Inc.

Analog Technologies, Inc. AHV12VN1KV3MAW HV DC-DC Power Supply Module 12VDC Input -1KV Output 3mA

SKU CH-A8PS-EHHQS

High-voltage DC-DC module converts 12 V input to an adjustable 0 to -1 kV output at up to 3 mA for industrial and scientific equipment

  • TypeLinear Power Supplies
  • Voltage-1KV
  • Amps3mA
  • Delivers up to -1 kV for high-voltage industrial processes
  • Adjustable 0 to -1 kV output controlled by 0–5 V signal
  • 12 V DC input with current draw between 80 mA and 350 mA
  • Metal enclosure provides zero EMI emission and effective heat sinking
  • Backed by Analog Technologies, Inc. for trusted quality and dependable support

High-Voltage DC-DC Module for Industrial Use

The Analog Technologies AHV12VN1KV3MAW converts a 12 VDC input into an adjustable negative output up to -1 kV at 3 mA. It is built as a linear supply with a metal enclosure that provides shielding and heat sinking for stable operation in demanding environments.

Suited for Precision High-Voltage Sources

Engineers developing X-ray, spectral analysis, semiconductor or particle-accelerator equipment will appreciate the 0 to 5 V control range and electronic shutdown. Buyers who need positive polarity, higher current or a different input voltage must look elsewhere.

Integration Into a 12 V System

The module accepts 12 V ± 1 V and draws between 80 mA and 350 mA depending on load, while a 5 V ± 0.05 V reference simplifies control-loop design. Its compact metal case and standardised connectors allow direct mounting without extra shielding hardware.

Pluspunten

  • Delivers up to -1 kV for high-voltage industrial processes
  • Adjustable 0 to -1 kV output controlled by 0–5 V signal
  • 12 V DC input with current draw between 80 mA and 350 mA
  • Metal enclosure provides zero EMI emission and effective heat sinking
  • Backed by Analog Technologies, Inc. for trusted quality and dependable support

Specificaties

TypeLinear Power Supplies
Voltage-1KV
Amps3mA

Vragen over dit artikel

What input voltage and current range must my existing supply provide for this module to operate?

The module requires a 12 V input with a tolerance of ±1 V and will draw between 80 mA and 350 mA depending on load conditions.

How does the electronic shutdown control interact with legacy safety interlocks I already have?

The shutdown pin accepts a standard logic-level signal, so it can be wired directly to existing interlock relays or PLC outputs without extra level-shifting circuitry.

How can I verify the output is regulating correctly after installation?

Measure the reference pin; it should read 5 V ±0.05 V, and the high-voltage output should track the 0–5 V control input proportionally from 0 to –1 kV.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.