Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Small yellow plastic adapter block with four black push-fit couplers on one face and a single outlet on the opposite side

ANKEI SA014-Y 4-in-1 PTFE Adapter for Bambu Lab 3D Printers Accessories

SKU CH-QQDA-KN2K5

A 4-in-1 PTFE adapter connects up to four feeder modules for multi-filament printing on compatible Bambu Lab printers

  • ColorOriginal4 in 1 PTFE Adapter
  • TypeSA014-Y
  • Compatible SystemOriginal4 in 1 PTFE Adapter
  • SpecificationOriginal4 in 1 PTFE Adapter
  • FeaturesOriginal4 in 1 PTFE Adapter
  • Connects four feeder modules simultaneously for multi-material printing
  • Built-in cleaning blade removes dust to prevent filament contamination
  • Anti-clog directional design with distinct input and output sides
  • Tool-free tube replacement by pressing black couplers
  • Engineered specifically for Bambu Lab 3D printer compatibility

4-in-1 PTFE Adapter for Bambu Lab Printers

This adapter connects four feeder modules to a Bambu Lab printer simultaneously, expanding filament options to seven types including AMS and non-AMS materials like TPU 95A or carbon-fibre composites. It replaces the original single connector for multi-material workflows.

Four-Port Limit and Directional Flow

The unit provides exactly four input ports and one output, so no more than four feed modules can be attached at once. Clearly marked input and output sides prevent reverse installation that would block filament movement.

Check Printer Model and Tube Condition

Verify your printer appears in the compatibility list such as X1C, P1S, A1 or A1 mini before ordering. Ensure existing PTFE tubes are undamaged and couplers lock securely, because worn tubes will not seat properly in the new adapter.

Pluspunten

  • Connects four feeder modules simultaneously for multi-material printing
  • Built-in cleaning blade removes dust to prevent filament contamination
  • Anti-clog directional design with distinct input and output sides
  • Tool-free tube replacement by pressing black couplers
  • Engineered specifically for Bambu Lab 3D printer compatibility

Specificaties

BrandANKEI
ModelSA014-Y
Part NumberSA014-Y
ColorOriginal4 in 1 PTFE Adapter
TypeSA014-Y
Compatible SystemOriginal4 in 1 PTFE Adapter
SpecificationOriginal4 in 1 PTFE Adapter
FeaturesOriginal4 in 1 PTFE Adapter

Vragen over dit artikel

Should I choose this 4-in-1 adapter or a single-port version for my Bambu Lab printer?

Choose this SA014-Y if you want to run up to seven filaments — one AMS unit plus three other spools — without swapping tubes. A single-port adapter only feeds one filament at a time.

What does the 4-in-1 label mean once the adapter is installed on my printer?

It means four PTFE tubes can be connected simultaneously, letting the printer pull from four separate feed modules so you can print multi-colour or multi-material jobs without manual changes.

How does the PTFE tube interface on this adapter work in practice?

The adapter uses press-fit couplers; press the black ring to release the old tube, then push the new PTFE tube in until it locks — no tools required.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.