Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Open-frame laser engraver on metal frame with air assist nozzle and honeycomb bed

ATOMSTACK

ATOMSTACK A20 Pro 20W Laser Engraver 400x400mm F30 Pro R3 Pro F2

SKU CH-HBRC-ZW4TD

A 20 W diode laser engraver with a 400×400 mm work area, F30 Pro air assist, R3 Pro rotary roller and F2 honeycomb table

  • TypeLaser Engraver & Cutter
  • Cuts 12 mm tungsten in one pass with 20 W optical power
  • 08 × 0.1 mm focus spot engraves mirror stainless steel like a 300 W CO2 laser
  • Twin-cylinder F30 Pro air assist boosts cutting capacity and quality
  • 400 × 400 mm work area plus R3 Pro rotary for cylinders
  • Built-in 32-bit board with 256-bit colour scale and offline terminal control

20W Diode Laser Engraver

The ATOMSTACK A20 Pro is a desktop laser engraver and cutter delivering 20W optical power through four 6W coupled diodes. It provides a 400x400mm work area and includes an F30 Pro air assist kit, an R3 Pro rotary roller and an F2 honeycomb table. A 32-bit motherboard with 256-bit colour scale drives the motion system.

Makers cutting thick sheet or marking metal

Users who need single-pass cuts in 12mm tungsten board, 8mm black acrylic or 0.03mm stainless steel will benefit from the high optical power and 0.08x0.1mm focus spot. The package suits hobbyists and small workshops adding rotary and offline control. Buyers who require a larger bed or a CO2 tube for non-metal throughput should look at other classes of machine.

Open-frame kit needing ventilation and 130W supply

The engraver ships as a frame kit that must be assembled on a stable bench with fume extraction and the supplied 130W power unit. The F30 Pro air assist connects to the onboard controller for cleaner cuts, while the R3 Pro roller enables cylindrical objects. The honeycomb table protects the surface and allows debris fall-through during long jobs.

Pluspunten

  • Cuts 12 mm tungsten in one pass with 20 W optical power
  • 08 × 0.1 mm focus spot engraves mirror stainless steel like a 300 W CO2 laser
  • Twin-cylinder F30 Pro air assist boosts cutting capacity and quality
  • 400 × 400 mm work area plus R3 Pro rotary for cylinders
  • Built-in 32-bit board with 256-bit colour scale and offline terminal control

Specificaties

TypeLaser Engraver & Cutter

Vragen over dit artikel

Does the engraver need an external computer or can it run jobs from its own control panel?

The machine includes a terminal control panel that supports offline engraving so it can run without a connected computer once a job is loaded.

Will the F30 Pro air assist kit and F2 honeycomb table fit on my existing 400x400 mm frame if I already own one?

Both the F30 Pro air assist kit and the F2 laser honeycomb working table are supplied with this engraver and match its 400x400 mm working area.

How can I verify the 0.08×0.1 mm focus spot is performing correctly after setup?

Engrave a test pattern on mirror stainless steel or ceramic; the ultra-fine spot should produce detail comparable to a 300 W CO2 laser.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.