Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen

Axiom

Axiom 46W0800-AX 32GB DDR4 2133 ECC CL15 288-pin memory upgrade

SKU CH-7T6B-W47A1 MPN 46W0800-AX

32GB DDR4 2133 ECC LRDIMM CL15 1.20V for IBM systems, 288-pin PC4-17000 upgrade

  • Capacity32GB
  • Type288-Pin DDR4 SDRAM
  • SpeedDDR4 2133 (PC4 17000)
  • CAS LatencyCL15
  • Voltage1.20V
  • ECCYes
  • 32 GB capacity expands system memory for demanding workloads
  • DDR4 2133 speed increases data throughput versus DDR3
  • ECC support detects and corrects single-bit errors automatically
  • CL15 latency provides responsive access timing
  • 20 V operation lowers power consumption by 20%

32 GB LRDIMM for IBM systems

This Axiom 46W0800-AX module provides 32 GB of DDR4 memory in a 288-pin LRDIMM form factor. It is built specifically for compatible IBM servers and workstations that require registered ECC memory. The module operates at DDR4 2133 with a CAS latency of CL15 and a voltage of 1.20 V.

Sustained operation with ECC stability

Error-correcting code detects and corrects single-bit errors during continuous operation, helping maintain data integrity under sustained workloads. The DDR4 standard reduces power demand by 20 percent compared to DDR3, which lowers thermal output during extended use. CL15 timing at 2133 MHz supports consistent throughput for memory-intensive server tasks.

DDR4 2133 interface limits

The PC4 17000 rating defines the maximum standard bandwidth available on this DDR4 2133 interface. LRDIMM buffering allows higher densities than standard RDIMMs, but the memory controller must support the load-reduced topology. Systems limited to DDR3 speeds or non-ECC configurations cannot use this module.

Pluspunten

  • 32 GB capacity expands system memory for demanding workloads
  • DDR4 2133 speed increases data throughput versus DDR3
  • ECC support detects and corrects single-bit errors automatically
  • CL15 latency provides responsive access timing
  • 20 V operation lowers power consumption by 20%

Specificaties

BrandAxiom
Model46W0800-AX
Capacity32GB
Type288-Pin DDR4 SDRAM
SpeedDDR4 2133 (PC4 17000)
CAS LatencyCL15
Voltage1.20V
ECCYes
Compatible SystemIBM
FeaturesDDR4 delivers:
- Faster data rates (Mb/s) - 100% over DDR3
- Higher Densities - Up to 300% over DDR3
- 20% reduced power demand
DDR4 Equals More Speed, Less Power Consumption, Greater System Efficiencies
With Axiom, enjoy guaranteed compatibility and a lifetime warranty from ‘The OEM Alternative™’
DDR4 Features:
- 100% Increase in speed - Faster Data Rate equates to more responsive application loads on data-intensive programs.
- 300% increase in component densities - Equals larger modules for next-generation performance demands.
- 20% decrease in power consumption - Less power consum
Verzendgewicht0.45 kg
Pakketafmetingen152 × 76 × 51 mm

Vragen over dit artikel

Does the 1.20 V DDR4 2133 module run cooler than DDR3 when the server is under load all day?

DDR4 operates at 1.20 V and the supplier highlights a 20 % reduced power demand versus DDR3, which lowers heat output during continuous operation.

What must the system already have to accept this 288-pin LRDIMM?

An IBM server that supports DDR4-2133/PC4-17000 LRDIMMs with ECC and CL15 timing.

Can I add this 32 GB stick alongside existing DDR3 DIMMs in the same machine?

No — DDR4 uses a different 288-pin keying and voltage, so it cannot share a memory channel with DDR3 modules.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.