NEMIX RAM
NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
US$ 62.908,99
0.7866377BTC
Op voorraad
Axiom
Axiom A5180173-AX 16GB DDR3 1333 ECC Registered server RAM
16 GB DDR3 1333 ECC registered DIMM running at 1.35 V with CL9 latency
- Capacity16GB
- SpeedDDR3 1333 (PC3 10600)
- CAS LatencyCL9
- Voltage1.35V
- ECCYes
- Buffered/RegisteredRegistered
- 16 GB DDR3 capacity for large server workloads
- ECC Registered design detects and corrects data errors
- CL9 latency at 1333 MHz for responsive access
- 35 V operation reduces power draw
- Single 16 GB DIMM simplifies upgrade planning
16 GB DDR3 ECC Registered module
This 16 GB DDR3 module runs at 1333 MHz with a CL9 latency and operates at 1.35 V. It is built for servers and workstations that require error-correcting code and registered signal processing for data integrity.
Fits DDR3 RDIMM slots in compatible platforms
The single 16 GB DIMM occupies one registered memory slot and uses the PC3-10600 standard. It frees additional slots for further capacity expansion while maintaining signal stability across the memory bus.
Steady throughput under continuous workloads
ECC detection corrects single-bit errors during sustained operation and the registered buffer reduces electrical load on the memory controller. The 1.35 V rating helps limit heat output during long-running compute tasks.
Pluspunten
- 16 GB DDR3 capacity for large server workloads
- ECC Registered design detects and corrects data errors
- CL9 latency at 1333 MHz for responsive access
- 35 V operation reduces power draw
- Single 16 GB DIMM simplifies upgrade planning
Specificaties
| Brand | Axiom |
|---|---|
| Model | A5180173-AX |
| Capacity | 16GB |
| Speed | DDR3 1333 (PC3 10600) |
| CAS Latency | CL9 |
| Voltage | 1.35V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Verzendgewicht | 0.09 kg |
| Pakketafmetingen | 152 × 76 × 25 mm |
Vragen over dit artikel
How much power does the 1.35 V DDR3 module draw under sustained server loads?
The module runs at 1.35 V, which is the low-voltage DDR3 standard, so power draw stays lower than standard 1.5 V DDR3 during continuous operation.
How much heat and noise does the registered ECC DIMM add to a fully populated chassis?
The registered ECC DIMM has no moving parts and operates at 1.35 V, so it adds minimal heat and zero noise to a fully populated chassis.
What motherboard slot and chipset support are required for this 16 GB DDR3 1333 registered ECC module?
A DDR3 DIMM slot and a chipset that supports registered ECC DDR3-1333 (PC3-10600) memory are required for this 16 GB module to function.
Ook in deze afdeling
Klanten vergeleken ook
Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.
NEMIX RAM
NEMIX RAM DDR5 ECC RDIMM 1.5TB 12x128GB 6400MHz CL52 1.1V 2Rx4 288-Pin Supermicro H14SST-GE
- 1.5TB (12 x 128GB)
- 288-Pin DDR5 RDIMM
US$ 57.634,99
0.72068962BTC
Op voorraad
NEMIX RAM
NEMIX RAM DDR5 6400 ECC Registered RDIMM 1.5TB 12x128GB 2Rx4 CL52 1.1V Supermicro H14DSH memory upgrade
- 1.5TB (12 x 128GB)
- 288-Pin DDR5 RDIMM
US$ 53.038,99
0.6632195BTC
Op voorraad
NEMIX RAM
NEMIX RAM DDR5 ECC RDIMM 2TB 16x128GB 6400MHz CL52 1.1V 2Rx4 Supermicro H14DSH
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
US$ 70.395,99
0.88025797BTC
Op voorraad