Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Green printed circuit board with black memory chips and gold edge connectors

Axiom

Axiom P00922-B21-AX 16GB DDR4-2933 ECC RDIMM server RAM

SKU CH-BNHK-APH9N MPN P00922-B21-AX

16 GB DDR4 ECC registered DIMM running at 2933 MHz with CL21 latency and 1.20 V operation

  • ECC protection prevents data corruption in critical workloads
  • Registered signal stabilises high-density server memory configurations
  • 2933 MHz speed accelerates data-intensive applications
  • 20 V operation reduces power draw per module
  • 288-pin RDIMM form factor fits standard DDR4 server slots

Server DDR4-2933 RDIMM

This Axiom P00922-B21-AX module delivers 16 GB of DDR4 ECC registered memory rated at 2933 MHz with CL21 timings. It is built for HP server platforms that require registered DIMMs for stable multi-module configurations. The single 16 GB stick suits administrators expanding capacity in supported systems.

Registered 288-pin build

The 288-pin RDIMM form factor uses a registered signal to reduce electrical load on the memory controller when populating multiple slots. Operating at 1.20 V, the module meets standard DDR4 voltage requirements for server mainboards. ECC circuitry detects and corrects single-bit errors to protect data integrity in continuous workloads.

Upgrade from lower-capacity DDR4 RDIMMs

Adding this 16 GB module increases total memory where the platform supports DDR4-2933 registered DIMMs and has free 288-pin slots. The jump is worthwhile when virtualisation, database or compute tasks exceed the capacity of smaller RDIMMs and the system qualifies the P00922-B21 or P06188-001 part numbers.

Pluspunten

  • ECC protection prevents data corruption in critical workloads
  • Registered signal stabilises high-density server memory configurations
  • 2933 MHz speed accelerates data-intensive applications
  • 20 V operation reduces power draw per module
  • 288-pin RDIMM form factor fits standard DDR4 server slots

Specificaties

Voor dit artikel zijn nog geen specificaties gepubliceerd.

Vragen over dit artikel

What bandwidth ceiling does the DDR4-2933 interface impose on this RDIMM?

The module runs at 2933 MHz on the DDR4 bus, which translates to a PC4-23466 peak transfer rate; the registered buffer adds one cycle of latency but does not raise the bandwidth limit beyond that rating.

What physical slot and clearance does the 288-pin RDIMM require?

It fits a standard 288-pin DDR4 DIMM socket; the registered form factor matches regular RDIMM height, so it clears typical server heatsinks and chassis air baffles without extra space.

How is the module installed, and which step is most often missed?

Power down the server, open the chassis, align the notch on the 288-pin edge connector with the key in the slot, press firmly until both retention clips click, then verify in BIOS that the 16 GB stick is detected at 2933 MHz with ECC active.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.