Axiom
Axiom SSDEV20HB480-AX 480 GB 2.5" SATA enterprise SSD
Hot-swap 2.5" Sata SSD delivering 480 GB capacity with 99K read and 18K write IOPS for latency-sensitive data-centre workloads
- TypeOffice Products
- Optimized for latency-sensitive mixed workloads with V-NAND technology
- Sustained read IOPS up to 99K for high throughput
- Enterprise endurance rated at 1.4 DWPD for 24/7 operation
- Hot-swap 2.5 inch Sata design fits existing infrastructure
- Built-in power-loss protection safeguards data integrity
Enterprise SATA SSD for latency-sensitive workloads
The Axiom SSDEV20HB480-AX is a 480 GB 2.5 inch SATA solid-state drive built for enterprise environments. It targets data centres that require 24/7 accessibility for converged and virtualised architectures. The drive is optimised for read-intensive applications where consistent throughput and data integrity are priorities.
Thermals noise and power draw
Low power consumption is a highlighted feature of the EV200 series, reducing operational cost in dense deployments. An onboard temperature sensor enables continuous monitoring to maintain safe operating conditions. Enterprise-grade power-loss protection safeguards data during unexpected outages without adding acoustic noise.
Endurance rating of 1.4 DWPD
The drive delivers 1.4 Drive Writes Per Day over its warranty period, a figure that determines suitability for mixed-use workloads. Sustained performance reaches up to 99K read IOPS and 18K write IOPS with low latency. Buyers needing higher write endurance or a different interface should evaluate alternative drives.
Pluspunten
- Optimized for latency-sensitive mixed workloads with V-NAND technology
- Sustained read IOPS up to 99K for high throughput
- Enterprise endurance rated at 1.4 DWPD for 24/7 operation
- Hot-swap 2.5 inch Sata design fits existing infrastructure
- Built-in power-loss protection safeguards data integrity
Specificaties
| Brand | AXIOM |
|---|---|
| Type | Office Products |
| Verzendgewicht | 0.45 kg |
| Pakketafmetingen | 25 × 25 × 25 mm |
Vragen over dit artikel
How is the 2.5 inch SATA hot-swap drive installed in a server bay?
Slide the drive into the hot-swap bay until the connector seats firmly, then secure the retention latch; the step often missed is not pushing far enough to engage the latch fully.
What maintenance or replacement will the EV200 SSD need over its service life?
The drive is rated for 1.4 drive writes per day; plan replacement when the media wear indicator approaches the rated endurance limit for the 480 GB capacity.
What performance limit appears first during sustained mixed workloads on this drive?
Sustained write IOPS top out at 18K while reads reach 99K, so write throughput becomes the bottleneck before the SATA 6 Gb/s interface saturates.
Ook in deze afdeling
Klanten vergeleken ook
Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.
