Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Black mid-tower case with tempered glass side panel, six ARGB fans visible through open-frame front, no vertical columns

BFKK

BFKK CPS C3T500 PC Case Mid Tower Black 6 ARGB Fans 360mm Radiator 400mm GPU

SKU CH-KH9H-PCVZJ

Mid-tower ATX case with six 120 mm ARGB fans, 360 mm radiator support and room for 400 mm graphics cards

  • TypeATX Mid Tower

Options Black

  • Column-free 3 mm tempered glass shows every component inside
  • Six 120 mm ARGB fans deliver strong airflow out of the box
  • Top and bottom mounts accept 280 mm or 360 mm radiators
  • 400 mm GPU clearance fits the longest graphics cards
  • Front I/O includes USB 3.1 Gen 2 Type-C and dual USB 3.0

Column-Free Mid-Tower Design

The BFKK CPS C3T500 is a mid-tower chassis built for ATX, micro-ATX and mini-ITX motherboards. Three-millimetre tempered glass panels wrap the interior without a central column, giving an unobstructed view of the installed hardware. Six 120 mm ARGB fans ship in the box, providing immediate airflow and lighting. The structure uses 0.7 mm SPCC steel for rigidity and a clean black finish.

Builders Who Want Quick Assembly

The snap-on quick-release side panels and tool-free drive brackets suit builders who value fast, screw-less assembly. Support for 360 mm radiators at the top or bottom and a 175 mm CPU cooler height limit cover most high-performance air and liquid setups. A 400 mm graphics-card length limit accommodates virtually all current GPUs. Systems requiring E-ATX boards, more than six expansion slots or radiators larger than 360 mm should consider a larger enclosure.

Component Capacity and Clearance Limits

Two 2.5-inch SSD mounts and two 3.5-inch HDD bays handle mainstream storage needs. The ATX power-supply bay accepts units up to 200 mm deep. Front I/O includes a USB 3.1 Gen 2 Type-C port, two USB 3.0 ports, separate audio jacks and a dedicated LED control button. Six rear expansion slots match standard ATX layouts. The 400 mm GPU and 360 mm radiator limits define the practical ceiling for the largest components.

Pluspunten

  • Column-free 3 mm tempered glass shows every component inside
  • Six 120 mm ARGB fans deliver strong airflow out of the box
  • Top and bottom mounts accept 280 mm or 360 mm radiators
  • 400 mm GPU clearance fits the longest graphics cards
  • Front I/O includes USB 3.1 Gen 2 Type-C and dual USB 3.0

Specificaties

TypeATX Mid Tower

Andere versies van dit model

Nog 5 in dezelfde serie

Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.

Vragen over dit artikel

What motherboard form factors does this case accept?

The CPS C3T500 supports ATX, M-ATX and ITX motherboards, so any board matching one of those three sizes will fit inside.

Will my existing 360 mm liquid-cooling radiator fit in the top or bottom mount?

Yes, the case reserves installation positions for both top and bottom 360 mm radiators, matching the 360 mm limit stated in the specifications.

How can I confirm the six included ARGB fans are running and lit after I build the system?

Press the LED switch button on the front I/O panel; it cycles the lighting modes of the six pre-installed 120 mm ARGB fans so you can verify they are powered and illuminated.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.