BIWIN STORAGE TECHNOLOGY LIMITED
BIWIN STORAGE TECHNOLOGY LIMITED 64GB 80mm MLC SATA internal SSD
- Internal Solid Stat…
- 64GB
US$ 29,99
0.00037634BTC
Op voorraad
BIWIN STORAGE TECHNOLOGY LIMITED
BIWIN STORAGE TECHNOLOGY LIMITED 256GB MLC SATA III M.2 2280 internal SSD
256 GB MLC internal SSD with SATA III interface delivering 561 MB/s read and 296 MB/s write speeds
- Device TypeInternal Solid State Drive (SSD)
- Form FactorM.2 2280
- Capacity256GB
- Memory ComponentsMLC
- InterfaceSATA III
- Max Sequential Read561MB/s
- MLC flash delivers 561 MB/s read speed
- SATA III 6 Gb/s interface enables 296 MB/s write speed
- DDR3 cache and BCH ECC 66-bit protection maintain data integrity
- 2 million hour MTBF and 50 G shock resistance ensure long-term reliability
- Low 0.25 W idle and 2.94 W active power reduces system energy use
Capacity and flash type
This BIWIN internal SSD delivers 256GB of storage using MLC flash memory. The drive targets users who need reliable SATA performance in the M.2 2280 form factor. It suits upgrades for compatible laptops, small-form-factor desktops and Intel NUC units.
Build integration
The module measures 80mm by 22mm by 3.2mm and weighs 6.7g, fitting standard M.2 slots keyed for SATA. A SATA III 6Gb/s interface and onboard DDR3 cache handle data transfer without requiring PCIe lanes. Power draw sits at 0.25W idle and 2.94W active from a 3.3V supply.
Sustained operation
Sequential reads reach 561MB/s and writes reach 296MB/s under load. The controller employs BCH ECC at 66 bits per 1KB to maintain data integrity during extended writes. MTBF is rated at 2000000 hours, while the operating range spans 0°C to 70°C with 5% to 95% humidity tolerance. Shock resistance is rated at 50G for 11ms half-sine events and vibration resistance at 3.1G across 2 to 500Hz.
Pluspunten
- MLC flash delivers 561 MB/s read speed
- SATA III 6 Gb/s interface enables 296 MB/s write speed
- DDR3 cache and BCH ECC 66-bit protection maintain data integrity
- 2 million hour MTBF and 50 G shock resistance ensure long-term reliability
- Low 0.25 W idle and 2.94 W active power reduces system energy use
Specificaties
| Brand | BIWIN |
|---|---|
| Device Type | Internal Solid State Drive (SSD) |
| Form Factor | M.2 2280 |
| Capacity | 256GB |
| Memory Components | MLC |
| Interface | SATA III |
| Max Sequential Read | 561MB/s |
| Max Sequential Write | 296MB/s |
| MTBF | 2,000,000 hours |
| Power Consumption (Idle) | 0.25W |
| Power Consumption (Active) | 2.94W |
| Operating Temperature | 0°C to 70°C |
| Storage Temperature | -40°C to 85°C |
| Operating Humidity | 5% to 95% |
| Max Shock Resistance | 50G,11ms, half-sine wave |
| Max Vibration Resistance | 3.1G(2-500Hz) |
| Height | 80mm |
| Width | 22mm |
| Depth | 3.2mm |
| Weight | 6.7g |
Andere versies van dit model
Nog 2 in dezelfde serie
Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.
BIWIN STORAGE TECHNOLOGY LIMITED
BIWIN STORAGE TECHNOLOGY LIMITED 120GB M.2 2280 SATA internal SSD
- Internal Solid Stat…
- M.2 2280
US$ 51,99
0.00065242BTC
Op voorraadVragen over dit artikel
At what point does the 561 MB/s sequential read speed stop being sustainable under a heavy workload?
The drive is rated for 0°C to 70°C operating temperature, so sustained transfers will throttle once the controller reaches that thermal ceiling.
How much heat and power does the drive produce when it runs all day at the 2.94 W active rating?
At 2.94 W active power the drive stays within the 0°C to 70°C range and has no moving parts, so acoustic noise is effectively zero.
What host hardware must already be present for this M.2 2280 SATA III drive to function?
The system needs an M.2 slot wired for SATA III 6 Gb/s signalling and a 3.3 V power rail; the drive draws 0.25 W idle and 2.94 W active.
Ook in deze afdeling
Klanten vergeleken ook
Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.
