Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Green rectangular DDR4 server memory module with gold contacts and black heat spreader

Black Diamond Memory

Black Diamond Memory BD32G2133MQR26 32GB DDR4 2133 ECC Registered server RAM

SKU CH-TYX3-VAWZ9 MPN BD32G2133MQR26

32 GB DDR4 2133 ECC registered server memory module with 288-pin design

  • Capacity32GB
  • Type288-Pin DDR4 SDRAM
  • SpeedDDR4 2133 (PC4 17000)
  • ECCYes
  • Buffered/RegisteredRegistered
  • Rank4Rx4

Capacity 32GB

Rank 4Rx4

  • 32 GB capacity supports memory-intensive server workloads
  • DDR4 2133 speed delivers 17000 MB/s bandwidth
  • ECC registered design detects and corrects data errors
  • 288-pin DDR4 form factor fits standard server slots
  • 4Rx4 rank organisation optimises density for high-capacity configurations

32 GB DDR4 2133 ECC Registered module

This 288-pin DDR4 SDRAM module delivers 32 GB of ECC Registered memory at 2133 MT/s (PC4-17000). It is built for servers and workstations that require error-correcting, registered DIMMs for data integrity and signal stability in multi-DIMM configurations. The 4Rx4 organisation supports high-density population on compatible platforms.

DDR4 2133 speed and registered buffering

The DDR4 2133 interface caps bandwidth at the PC4-17000 rate, so throughput is limited to this generation’s maximum. Registered buffering adds a clock cycle of latency but reduces electrical load on the memory controller, allowing more modules per channel. Systems that only support unbuffered or lower-speed DDR4 cannot use this module.

4Rx4 288-pin build for dense server configs

The 288-pin form factor fits standard DDR4 server slots, while the 4Rx4 rank structure enables 32 GB per DIMM for dense memory deployments. ECC circuitry corrects single-bit errors and detects multi-bit errors during operation. Modules are tested for compatibility across a wide range of enterprise server configurations.

Pluspunten

  • 32 GB capacity supports memory-intensive server workloads
  • DDR4 2133 speed delivers 17000 MB/s bandwidth
  • ECC registered design detects and corrects data errors
  • 288-pin DDR4 form factor fits standard server slots
  • 4Rx4 rank organisation optimises density for high-capacity configurations

Specificaties

BrandBlack Diamond Memory
ModelBD32G2133MQR26
Capacity32GB
Type288-Pin DDR4 SDRAM
SpeedDDR4 2133 (PC4 17000)
ECCYes
Buffered/RegisteredRegistered
Rank4Rx4
FeaturesServer Memory
Verzendgewicht0.11 kg
Pakketafmetingen178 × 76 × 51 mm

Andere versies van dit model

Nog 5 in dezelfde serie

Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.

Vragen over dit artikel

Is the 32 GB capacity sold as a single module or only in a 64 GB kit of two modules?

The module is offered as a single 32 GB unit; the supplier also lists a 64 GB kit containing two of these modules for dual-channel upgrades.

What does the DDR4 2133 (PC4 17000) rating mean for actual server performance?

It delivers a maximum data rate of 2133 MT/s and a peak bandwidth of 17000 MB/s, which the memory controller can use when the platform is configured for that speed.

How does the 288-pin DDR4 registered interface affect installation and speed limits?

The 288-pin registered DDR4 form factor fits only DDR4 server slots, and the module will run at up to 2133 MT/s when the platform supports that speed.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.